You may also like
SATCO Lighting S11210 4W, LED, 3000K, Clear, Candelabra Base, 120-130V
4 Watt - LED - 3000K - Clear - Candelabra base - 120-130 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.033-0.031A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- T4
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 480L
- Product Type:
- Miniature
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Plastic
- Incandescent Equivalent:
- 35W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V-130V
- Beam Spread Angle:
- 360
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4W
- Product Weight:
- 0.02 lb
- Product Material:
- Plastic
Satco Lighting S11210 – Frequently Asked Questions
1) Will the Satco S11210 LED candelabra bulb fit a standard chandelier socket?
Yes, the S11210 uses a candelabra base, which is the small screw base standard chandeliers, sconces and decorative fixtures use. The base itself is plastic rather than metal. It runs on 120-130 volt line power, so no transformer or driver is needed.
2) What incandescent wattage does this 4W Satco LED candelabra bulb replace?
It replaces a 35 watt incandescent candelabra lamp, drawing 4 watts to do it at 480 lumens. Current draw is 0.033 to 0.031 amps, so a chandelier that used to pull several hundred watts across its sockets drops to a fraction of that load.
3) Can I put this Satco T4 LED lamp in an enclosed fixture?
Yes. The S11210 is an enclosed rated lamp, so a closed globe, lantern or sealed decorative fixture is fine. It also carries a damp location rating, which covers covered porches, bathrooms and similar areas but not direct exposure to rain or sprinklers.
4) Is the Satco S11210 candelabra LED dimmable?
Yes, it is a dimmable lamp. Note that it is not a three-way bulb, so it will not step through levels in a three-way socket. If your chandelier is on a dimmer, the dimmer should be an LED-compatible type, since a 4 watt lamp draws very little load.
5) Will a clear T4 LED bulb match the warm look of the incandescent candelabra bulbs already in my fixtures?
Close. The S11210 is 3000K, a soft warm white, with a clear lens that shows the lamp the way an exposed decorative bulb is meant to look. Color rendering is 80 CRI. If the rest of your building is on 2700K lamps, 3000K will read slightly cooler side by side, so standardize a whole fixture or a whole room at a time.
6) Can this Satco LED candelabra bulb be installed base-up in a ceiling fixture?
Yes, burning position is universal, so base-up, base-down or horizontal all work. That matters for chandeliers and pendants where some sockets point up and others down. Light output is a full 360 degree spread, not a directional beam.
7) How long do these 4W LED candelabra lamps last before relamping?
Average rated life is 25,000 hours. For a property manager running lobby or corridor chandeliers roughly 12 hours a day, that works out to several years between relamps, which is the main reason these get specified over incandescent candelabra bulbs in high-ceiling fixtures that need a lift to service.
8) Does the Satco S11210 meet California Title 24 requirements?
Yes, it is Title 24 compliant and FCC compliant. It is not DLC listed, so if your utility rebate program requires a DesignLights Consortium listing, this lamp will not qualify for it.
9) Can I change the color temperature on this bulb?
No. The S11210 is fixed at 3000K with no CCT selectable switch. If you need one lamp that can be field-set between warm and cool, this is not that product, and you would want a CCT selectable candelabra lamp instead.
How fast can I get the Satco Lighting S11210 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11210 come with a warranty?
Absolutely. The Satco Lighting S11210 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11210?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11210 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.