You may also like
SATCO Lighting S11212 4W, LED, 3000K, Frosted, Candelabra Base, 120-130V
4 Watt - LED - 3000K - Frosted - Candelabra base - 120-130 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.033-0.031A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- T4
- Lens Finish:
- Frost
- Lensed:
- Yes
- Lumens:
- 460L
- Product Type:
- Miniature
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Plastic
- Incandescent Equivalent:
- 35W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V-130V
- Beam Spread Angle:
- 360
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4W
- Product Material:
- Plastic
- Product Weight:
- 0.02 lb
Satco Lighting S11212 – Frequently Asked Questions
1) Will the Satco S11212 LED candelabra bulb work in an enclosed fixture?
Yes. The S11212 is an enclosed rated lamp, so it can go in a closed globe, a jelly jar, or a sealed sconce without voiding the rating. It also carries a damp location rating, which covers covered porches, bathrooms, and similar spots that see humidity but not direct water.
2) What incandescent candelabra bulb does this 4W Satco LED replace?
It is built to replace a 35W incandescent candelabra lamp, putting out 460 lumens at 4 watts. The color is 3000K, a soft warm white rather than the yellower 2700K most old incandescents ran at, so if you are swapping only some bulbs in a chandelier expect a slightly cleaner tone next to the remaining incandescents.
3) Will a candelabra base LED fit my chandelier sockets, or do I need a medium base bulb?
The S11212 uses a candelabra base, the small E12 screw socket found on chandeliers, wall sconces, and decorative fixtures. If your fixture takes the standard household size bulb, that is a medium base and this will not thread in. The base on this lamp is plastic rather than metal.
4) Will this LED run on a 277V circuit or only standard building voltage?
Standard line voltage only. The S11212 is rated 120V to 130V, so it works on ordinary 120V branch circuits found in apartments, corridors, and guest rooms. It is not a 277V lamp, so do not put it in commercial fixtures wired for higher voltage.
5) Is the Satco S11212 candelabra LED dimmable?
Yes, it is a dimmable lamp. Draw is only 0.033 to 0.031 amps, which is the practical catch on a retrofit: an old incandescent dimmer sized for a heavy load often will not see enough current from a handful of these to dim smoothly. On a chandelier that is being converted entirely to LED, plan on an LED-rated dimmer.
6) Can this bulb be installed base up, base down, or sideways?
Any of them. Burning position is universal, so the lamp can go base up in a ceiling fixture, base down in a chandelier arm, or horizontal in a sconce with no effect on rated life. Light output is 360 degrees around the lamp rather than directional, so it lights an open shade evenly whichever way the socket points.
7) Is the Satco S11212 a clear filament bulb or frosted?
Frosted. The lens finish is frost and the lamp is lensed, which diffuses the diodes so you do not see hot spots through an open or bare shade. If the fixture has exposed bulbs and the look calls for a visible filament, this is not the one. Shape is T4, the narrow tubular candelabra profile, not a flame or torpedo shape.
8) Does this Satco candelabra LED meet California Title 24?
Yes, the S11212 is Title 24 compliant, which matters if you are specifying lamps for residential work in California. It is also FCC compliant. It is not a DLC listed product, so if a commercial utility rebate program requires DLC, this lamp will not qualify for it.
9) How long will these last in a hotel or apartment corridor chandelier?
Rated life is 25,000 hours. On a fixture running about 12 hours a day that is roughly five and a half years between relamps, which is the argument for standardizing a building on them instead of chasing burned out incandescent candelabras. Color rendering is 80 CRI, adequate for corridors, lobbies, and common areas.
10) Can I use this as a three-way bulb or switch its color temperature?
No on both counts. The S11212 is a fixed 3000K lamp with no CCT selection, and it is not a three-way bulb, so in a three-way socket it will simply run at full output on every step. For a fixture where staff need to change the light level, use the dimming capability on an LED-rated dimmer instead.
How fast can I get the Satco Lighting S11212 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11212 come with a warranty?
Absolutely. The Satco Lighting S11212 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11212?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11212 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.