SATCO Lighting S11302 4W CA11 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.57
Satco Lighting SAT-S11302 4 Watt CA11 LED - Satin Spun Clear - Candelabra base - 2700K - 120 Volt

SATCO Lighting S11302 4W CA11 LED, Satin Spun Clear, Candelabra Base, 2700K, 120V

(No reviews yet) Write a Review

Model: S11302
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11302 4W CA11 LED, Satin Spun Clear, Candelabra Base, 2700K, 120V

4 Watt CA11 LED - Satin Spun Clear - Candelabra base - 2700K - 120 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.033A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED Filament
Lamp Shape:
CA11
Lens Finish:
Spun
Lensed:
Yes
Lumens:
300L
Product Type:
Candle
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Candelabra
Base Material:
Glass
Incandescent Equivalent:
40W
Location Rating:
Damp
CRI:
80
Subcategory:
LED
Title 24 Compliant:
No
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
300
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
4W
Product Material:
Glass
Product Weight:
0.04 lb

Satco Lighting S11302 – Frequently Asked Questions

1) What incandescent candelabra bulb does the Satco 4W CA11 replace?
It replaces a 40W incandescent candle at 4 watts, putting out 300 lumens at 120 volts. Current draw is 0.033A, so a chandelier that was pulling several amps on incandescents drops to a fraction of that, which matters when you are loading a dimmer circuit in a lobby or dining room.
2) Is the Satco S11302 candelabra LED dimmable?
Yes, the S11302 is a dimmable lamp. It is a 120V LED filament bulb, so pair it with a dimmer rated for LED loads; a legacy incandescent dimmer sized for a few hundred watts often will not see enough load from a handful of 4W lamps to dim smoothly.
3) Can I use this LED candle bulb in an enclosed fixture or a closed-glass sconce?
Yes. The S11302 is an enclosed rated lamp, so it is approved for sealed or closed-glass fixtures where heat builds up. Burning position is universal, so it can go base up, base down or sideways without affecting rated life.
4) Can the Satco 4W CA11 go in a covered porch light or a bathroom vanity?
It carries a damp location rating, which covers covered porches, bathrooms and other spots that see humidity but no direct water. Do not use it in a wet location such as an open-sky fixture or anywhere exposed to rain or spray; that needs a wet-rated lamp.
5) Will this bulb match the warm color of the incandescent candelabras already in my building?
At 2700K it reads as the warm yellow-white of a traditional incandescent candle lamp, so it blends with existing incandescents on the same chandelier or adjacent sconces. CRI is 80. Color temperature is fixed, not selectable, so every lamp in a re-lamp batch renders the same.
6) Does the satin spun finish on the S11302 hide the LED filament glare?
The satin spun clear glass diffuses the filament so you get a softer glow instead of hot points of light, which is what you want in an exposed chandelier where the lamp is visible. It is a lensed lamp with a 300 degree beam spread, so light goes nearly all the way around rather than firing in one direction.
7) How long will these last before I have to relamp a high chandelier again?
Rated average life is 15,000 hours. On a lobby or corridor chandelier running roughly 12 hours a day that is about three and a half years between lift rentals, which is the usual reason maintenance groups move candelabra fixtures off incandescent.
8) Does the Satco S11302 qualify for a DLC utility rebate or California Title 24?
No on both counts. The 4W CA11 is not DLC approved and is not Title 24 compliant, so do not spec it where a rebate application or a California residential compliance path depends on those. It is FCC compliant.
9) Can I use this as a 3-way candelabra bulb?
No. The S11302 is a single-level lamp, not three-way. In a 3-way socket it will run at one output only. For stepped output you need a lamp built for it.
How fast can I get the Satco Lighting S11302 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11302 come with a warranty?
Absolutely. The Satco Lighting S11302 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11302?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11302 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!