SATCO Lighting S11307 4W CA11 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.07
Satco Lighting SAT-S11307 4 Watt CA11 LED - Satin Spun Amber - Candelabra base - 2100K - 120 Volt - Carded

SATCO Lighting S11307 4W CA11 LED, Satin Spun Amber, Candelabra Base, 2100K, 120V, Carded

(No reviews yet) Write a Review

Model: S11307
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11307 4W CA11 LED, Satin Spun Amber, Candelabra Base, 2100K, 120V, Carded

4 Watt CA11 LED - Satin Spun Amber - Candelabra base - 2100K - 120 Volt - Carded

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.033A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED Filament
Lamp Shape:
CA11
Lens Finish:
Spun Amber
Lensed:
Yes
Lumens:
200L
Product Type:
Candle
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Candelabra
Base Material:
Glass
Incandescent Equivalent:
40W
Location Rating:
Damp
CRI:
80
Subcategory:
LED
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
300
Light Temperature:
2100K
Product Category:
Light Bulbs
Product Wattage:
4W
Product Material:
Glass
Product Weight:
0.56 lb

Satco Lighting S11307 – Frequently Asked Questions

1) How bright is this 4W amber CA11 filament lamp compared to an incandescent?
It is rated 200 lumens at 4 watts and Satco calls it a 40W incandescent equivalent. Note the 2100K amber output: this is a warm, vintage-looking lamp, not a general task light, so it reads dimmer than a 2700K 40W bulb even at the same nominal equivalence.
2) Can I put this bulb in an enclosed fixture or an outdoor covered porch light?
Yes on enclosed fixtures, it is an enclosed rated lamp, so sealed globes and lanterns are fine. Location rating is Damp, which covers covered porches, soffits and bathrooms, but not wet locations with direct rain or sprinkler exposure.
3) Is the Satco S11307 dimmable, and will it work on my existing dimmer?
It is a dimmable LED at 120V drawing only 0.033A. That tiny load is the thing to watch: older magnetic or high minimum load dimmers often flicker or refuse to start with a single 4W lamp. On a chandelier with several lamps, or on an LED-rated dimmer, it behaves normally.
4) Will this bulb match the other lamps in my fixture if the rest are 2700K soft white?
No, and it will look obviously different. At 2100K with a spun amber glass lens, the S11307 is a deep vintage amber glow, well below the 2700K soft white most candelabra lamps use. If you are relamping a multi-light chandelier, change all of them together.
5) Can this amber LED be installed base up in a chandelier or does it have to point up?
Burning position is universal, so base up, base down, or horizontal are all acceptable. The 300 degree beam spread means the light throws nearly all the way around the lamp, which is what you want for exposed candelabra fixtures.
6) Does this Satco candelabra lamp qualify for California Title 24?
Yes, it is listed as Title 24 compliant, and it is FCC compliant as well. It is not DLC listed, so it will not count toward DLC-based commercial rebate programs.
7) How long does this LED filament candelabra bulb last in a hospitality or common-area fixture?
Rated life is 15,000 hours. Run roughly 12 hours a night in a lobby or corridor sconce, that is about three and a half years between relamps. It is an LED filament design in glass, so it reads like a vintage bulb while pulling 4 watts.
8) Is the S11307 a three-way or color-selectable bulb?
Neither. It is a fixed 2100K amber lamp with no CCT selection and no three-way circuitry, so it should not be installed in a three-way socket expecting stepped output. For output control, use it on a dimmer instead.
9) Is the color quality good enough for a restaurant dining room?
CRI is 80, which is standard for decorative LED and fine for ambiance lighting. Paired with the 2100K amber glass it gives a candle-like tone rather than accurate color rendering, so if you are lighting food or artwork for color fidelity, put a higher CRI lamp on those fixtures and keep these for atmosphere.
How fast can I get the Satco Lighting S11307 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11307 come with a warranty?
Absolutely. The Satco Lighting S11307 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11307?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11307 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!