You may also like
SATCO Lighting S11341 6W, MR16 LED, 3000K, GU5.3 Base, 40 degree Beam Angle, 24V
6 Watt - MR16 LED - 3000K - GU5.3 base - 40 deg. Beam Angle - 24 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.250-0.025A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Gray
- Lamp Base:
- Bi Pin GU5.3
- Lamp Filament:
- LED
- Lamp Shape:
- MR16
- Lens Finish:
- Gray
- Lens Material:
- Plastic (PS)
- Lensed:
- Yes
- Lumens:
- 550L
- Operating Frequency:
- 60Hz
- Product Type:
- MR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 50W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic / Electronic Components
- Product Voltage:
- 24V AC/DC
- Beam Spread Angle:
- 40
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 6W
- Product Material:
- Metal / Plastic / Electronic Components
- Product Weight:
- 0.08 lb
Satco Lighting S11341 – Frequently Asked Questions
1) Will the Satco S11341 MR16 LED work in a standard 120V track head or line-voltage fixture?
No. The S11341 is a 24V AC/DC lamp and needs a 24-volt supply, typically a transformer or driver feeding low-voltage heads. Put it on 120V line voltage and it will fail. If the socket is a GU5.3 bi-pin, that alone does not tell you the voltage, so trace the circuit back to the transformer before you order.
2) Can I use this 24V MR16 LED in a fully enclosed or recessed can fixture?
Yes, the S11341 is an enclosed rated lamp, so a sealed or gasketed housing that traps heat is within spec. It also carries a Damp location rating, which covers covered porches, soffits, and bathrooms, but not direct exposure to rain or spray. Burning position is universal, so it can point up, down, or sideways.
3) Will this 3000K MR16 match the other bulbs already in my building?
The S11341 is fixed at 3000K, a warm white, and it is not color-selectable, so what you order is what you get on the wall. If the adjacent fixtures are 2700K they will read noticeably yellower next to it, and 4000K will read cooler and bluer. CRI is 80, standard for commercial spaces but not a high-CRI lamp for retail color-critical display.
4) Is a 40 degree beam angle right for general room lighting or for accent lighting?
Forty degrees is a flood, not a spot. It washes a broad area and suits general downlighting, cove and soffit runs, or lighting artwork and merchandise from a distance without a hard edge. If you want a tight punch on a single object, a narrower beam MR16 is the better call.
5) Can this MR16 run on a 24V DC battery or solar circuit, not just an AC transformer?
Yes. The lamp is specified 24V AC/DC, so it works on a 24 volt DC supply as well as a 24 volt AC transformer running at 60Hz. That covers landscape and emergency circuits fed from batteries or DC drivers as well as conventional low-voltage AC systems.
6) Does the Satco S11341 qualify for a DesignLights Consortium utility rebate?
No, this MR16 is not DLC approved, so it will not clear a utility program that requires a DLC listing on the qualified products list. It is FCC compliant and lawful for sale in California.
7) How long does a 6W Satco MR16 LED last before it needs relamping?
Rated at 25,000 hours average life. For a property manager running fixtures 12 hours a day that is roughly 5.7 years between relamps, which is what makes these worth doing on high-ceiling or hard-access openings where the labour costs more than the lamp.
8) Does the Satco S11341 MR16 have a covered lens or exposed LEDs?
It is lensed, with a plastic (PS) lens in gray, and the housing is gray as well. A lens diffuses the array so you do not get individual LED hot spots or pixelation in the beam, which matters where the lamp sits in an open track head at eye level.
9) Is this MR16 LED a three-way bulb?
No. The S11341 is a single-output 6W lamp, not three-way. Level control comes from an external dimmer on the low-voltage circuit, since the lamp itself is dimmable.
How fast can I get the Satco Lighting S11341 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11341 come with a warranty?
Absolutely. The Satco Lighting S11341 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11341?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11341 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.