SATCO Lighting S11356 8W, A19 LED, Soft White, 2700K, Medium Base, 120V

2700K soft white is the warm, slightly yellow tone that matches a standard incandescent or halogen bulb. If you are relamping a building where the old A19 incandescents are still in place, this matches them. It will look noticeably warmer than a 3000K or 4000K bulb, so avoid mixing it in the same room or fixture with those.

No. It is a 120 volt lamp. For 277 volt lighting circuits common in commercial panels, you need a lamp or fixture rated for that voltage, or the lamp will fail immediately.

It is a dimmable A19 LED. Keep in mind that LED bulbs need an LED-compatible dimmer; older magnetic or incandescent-rated dimmers running a single 8 watt bulb often sit below the dimmer's minimum load and will flicker or buzz. On a multi-bulb fixture that is usually a non-issue.

The S11356 is rated 90+ CRI, which means colors render close to natural light. That matters where people judge color: hotel guest rooms and bathrooms, retail displays, healthcare exam areas, and anywhere skin tone or fabric color is being looked at. For a back-of-house corridor or storage room, a standard 80 CRI lamp would look much the same.

The published data for the S11356 covers wattage, output, color, base type and voltage, but not enclosed-fixture suitability. Heat is what kills an LED in a sealed globe or a tight recessed can, so for those locations specify a lamp that states enclosed-rated on its own spec sheet. In open fixtures, table lamps, sconces and ceiling fans, this bulb is straightforward.

Each bulb is listed at 0.08 lb. A case-quantity relamp of a few hundred lamps is therefore light; the packaging, not the bulbs, drives the freight weight.