You may also like
SATCO Lighting S11413 9W A19 LED, 4000K, Medium Base, 220 degree Beam Angle, 100-Pack
9 Watt A19 LED - 4000K - Medium base - 220 deg. Beam Angle - 100-pack
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.075A
- Avg Rated Hours:
- 10000
- Burning Position:
- Universal
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lensed:
- Yes
- Lumens:
- 760L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Acrylic
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9W
- Product Weight:
- 0.26 lb
- Product Material:
- Acrylic
Satco Lighting S11413 – Frequently Asked Questions
1) Can the Satco S11413 A19 LED be used on a dimmer switch?
No. The S11413 is a non-dimmable lamp, so it has to run on a standard on/off switch. Put it on a dimmer and you can expect flicker, buzz, or early failure. If the fixture is on a dimmer circuit, specify a dimmable A19 instead or swap the control to a toggle.
2) Is this 9W A19 LED safe to install in a fully enclosed ceiling fixture?
Yes, it's an enclosed rated lamp, so closed globes, jelly jars, and sealed ceiling fixtures are all fair game. It also carries a damp location rating, which covers covered porches, bathrooms, and laundry rooms. Damp is not wet, so skip exposed outdoor sockets with direct rain contact.
3) Will a 9W LED actually be as bright as the 60W incandescent bulbs I'm pulling out?
It replaces a 60 watt incandescent and puts out 760 lumens on 9 watts at 120V, so tenants won't notice a drop in light level. What they will notice is the color: 4000K is a neutral white, cooler than the warm yellow of the incandescent you're removing.
4) Can these Satco LED bulbs be sold or installed in California?
No. The S11413 is flagged non-compliant for California, so it should not be specified for projects or stocked for jobs in that state. Pick a California-compliant A19 LED for those openings.
5) I'm standardizing bulbs across an apartment portfolio. Is 4000K the right choice here?
4000K is neutral white, the usual pick for corridors, stairwells, laundry rooms, garages, and back-of-house where you want clean, task-level light. For unit interiors and lobbies most managers stay at 2700K or 3000K so the space reads warm. The lamp is a fixed 4000K, not color selectable, so decide the temperature before you commit to a 100-pack.
6) Can this bulb be installed base-up in a recessed can or pointed sideways in a sconce?
Any orientation works. Burning position is universal, so base-up in a recessed can, base-down in a pendant, or horizontal in a wall sconce are all acceptable. The 220 degree beam spread and frosted lens throw light broadly rather than in a cone, which is what you want in a general-illumination fixture.
7) Can I use the Satco S11413 as a replacement for a 3-way bulb?
No. It isn't a three-way lamp, so in a 3-way socket it will only light at one level (or not behave predictably across the switch positions). For a 3-way table lamp you need a lamp specifically rated three-way.
8) Will these Satco bulbs qualify for a DLC utility rebate program?
No. The S11413 is not DLC approved, so it won't qualify under rebate programs that require a DesignLights Consortium listing. If a utility incentive is part of your project budget, choose a DLC-listed lamp.
9) Is an 80 CRI bulb good enough for a hotel or healthcare corridor?
At 80 CRI, color rendering is adequate for corridors, utility spaces, parking structures, and MRO work where color accuracy isn't critical. For guest rooms, retail display, or exam areas where skin tones and finishes need to read true, specify a 90+ CRI lamp instead.
10) How much load do these A19 LEDs put on a circuit if I'm relamping a whole building?
Each lamp draws 0.075A at 120V, 60Hz, 9 watts. That means a 15A lighting branch circuit is nowhere near loaded by these, and a 100-pack relamp pulls roughly 7.5A total if every lamp were on one circuit. Useful math when you're converting incandescent circuits that were previously near capacity.
11) How long will these 9W A19 LEDs last before maintenance has to go back up the ladder?
Average rated life is 10,000 hours. On a 12-hour-a-day corridor schedule that's a bit over two years of service; on a 4-hour residential duty cycle it stretches well past six. For high-access-cost locations like stairwell soffits, longer-life lamps are worth the premium.
12) Are these bulbs glass? I need something that won't shatter in a rental unit.
The lamp body and base material are acrylic rather than glass, which holds up better to handling and drops in turnover work and tenant-occupied units. Each lamp weighs 0.26 lb.
How fast can I get the Satco Lighting S11413 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11413 come with a warranty?
Absolutely. The Satco Lighting S11413 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11413?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11413 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.