SATCO Lighting S11421 8W, A19 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.77
Satco Lighting SAT-S11421 8 Watt - A19 LED - Dusk to Dawn - 2700K - Medium base - 200 deg. Beam Angle - 120 Volt

SATCO Lighting S11421 8W, A19 LED, Dusk to Dawn, 2700K, Medium Base, 200 degree Beam Angle, 120V

(No reviews yet) Write a Review

Model: S11421
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.77
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11421 8W, A19 LED, Dusk to Dawn, 2700K, Medium Base, 200 degree Beam Angle, 120V

8 Watt - A19 LED - Dusk to Dawn - 2700K - Medium base - 200 deg. Beam Angle - 120 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.067A
Avg Rated Hours:
15000
Burning Position:
Universal
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
A19
Lens Finish:
White
Lens Material:
Polycarbonate (PC)
Lensed:
Yes
Lumens:
800L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
3 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
60W
Location Rating:
Damp
Base Material:
Polycarbonate (PC) / High Heat Conductive Plastic Housing
Location Indoor/ Outdoor:
Indoor;Outdoor
Product Voltage:
120V
Beam Spread Angle:
200
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
8W
Product Material:
Polycarbonate (PC) / High Heat Conductive Plastic Housing
Product Weight:
0.1 lb

Satco Lighting S11421 – Frequently Asked Questions

1) Can I put the Satco S11421 dusk to dawn bulb on a dimmer switch?
No. The S11421 is not dimmable, and it also is not a three-way lamp. Put it on a plain on/off circuit that stays energized, since the built-in photocell is what turns it on at dark and off at daylight. If the switch or dimmer cuts power, the sensor cannot do its job.
2) Can the S11421 go in a fully enclosed lantern or jelly jar fixture?
Yes. It is an enclosed rated lamp, so the sealed glass lanterns and jelly jars common on multifamily entries and stairwells are within spec. Burning position is universal, so base up, base down, or horizontal all work. One caution with any photocell lamp: mount it where ambient light can reach the sensor, or it may not switch reliably.
3) Can I sell or install the Satco S11421 in California?
No. This lamp is flagged non-compliant for California, so it should not be specified for jobs in that state. Source a California-compliant LED A19 instead for those openings.
4) Will the light color match the warm bulbs already in my building's exterior fixtures?
The S11421 runs 2700K, the warm white that reads the same as a standard soft white incandescent, with a CRI of 80. It is a fixed color temperature, not CCT selectable, so every bulb out of the box is identical, which is what you want when standardizing a building's entries.
5) How many of these can I put on one 15 amp lighting circuit?
Each lamp draws 0.067A at 120V, 60Hz. That is a very small load per fixture, so circuit capacity is rarely the limit on an exterior lighting run with these. Rated life is 15,000 hours, which for a dusk to dawn lamp burning roughly half the year's hours works out to several years between relamps.
6) How wide does this dusk to dawn bulb throw light?
200 degrees of beam spread, which is wider than a hemisphere, so it throws light back along the sides of the lamp as well as forward. Combined with the white polycarbonate lens, that gives diffuse coverage suited to walkway and entry fixtures rather than a directional spot.
7) Is this bulb DLC listed for a utility rebate?
No. The S11421 is not DLC approved, so it will not qualify where a rebate program requires a DLC listing. It is FCC compliant for electromagnetic interference.
8) What is the housing made of, and will it hold up in an outdoor fixture?
Housing is polycarbonate over a high heat conductive plastic, with a polycarbonate lens rather than glass. That means no glass to shatter when a maintenance tech is relamping a lantern on a ladder, and the heat conductive body handles the enclosed fixtures this lamp is rated for.
How fast can I get the Satco Lighting S11421 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11421 come with a warranty?
Absolutely. The Satco Lighting S11421 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11421?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11421 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!