SATCO Lighting S11440 9W, A19 LED, Full Spectrum Plant Grow Lamp, Medium Base, 120V

No. The S11440 is a non-dimmable lamp. On a dimmer it will flicker, buzz, or drop out entirely, and the dimmer can be damaged. Put it on a plain switch or a timer that fully makes and breaks the circuit. It is also not a three-way lamp, so it will not step through levels in a three-way socket.

Yes. The lamp is rated for both indoor and outdoor use and carries a wet location rating, so damp greenhouse air, misting, and a covered porch fixture are all within rating. The fixture it goes into still has to be rated for the location, and the lamp base is plastic, so keep it in a socket that supports the lamp rather than an exposed pendant taking weather directly.

Expect colored light. Both the housing and the lens are green, and the output is tuned as a full spectrum plant lamp, not a general illumination source. It will tint whatever is around it, so do not spec it for an occupied office, a lobby, or a corridor where color appearance matters. For a plant wall or a back-of-house propagation area it is fine. CRI is 80 if you are evaluating it against general lighting.

Burning position is universal, so base-up, base-down, or horizontal all work. That matters for grow use because most plant setups run the lamp base-up in a clamp reflector aimed down at the canopy. The 200 degree beam spread throws light across a wide area rather than a tight spot, so a single lamp covers a shelf instead of one pot.

No, there is no color temperature selection on this lamp. It ships one way, a green finish full spectrum plant lamp, with no CCT-selectable switch on the base. If a facility needs a tunable white lamp for occupant spaces, this is the wrong part and you want a standard A19 LED rather than a grow lamp.

Not through the DesignLights Consortium. The S11440 is not DLC approved, so it will not appear on the DLC qualified products list that most commercial utility rebate programs draw from. Horticultural lamps are commonly handled outside standard lighting rebates anyway. The lamp is FCC compliant, which is the electrical noise requirement for the equipment itself.

Yes, the S11440 is lawful for sale in California. That matters for LED lamps because California's appliance efficiency regulations restrict which general service lamps can be sold in the state, and distributors shipping into CA need the confirmation before they stock it.