SATCO Lighting S11771 9W A19 LED, Medium Base, CCT Selectable, White Finish, 90 CRI, 120V
9 Watt A19 LED - Medium Base - CCT Selectable - White Finish - 90 CRI - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.075A
- Avg Rated Hours:
- 10000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- Yes
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 3000K/4000K/5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 9W
- Product Weight:
- 0.08 lb
- Product Material:
- Plastic
Satco Lighting S11771 – Frequently Asked Questions
1) Can the Satco S11771 A19 LED be used on a dimmer switch?
No. The S11771 is a non-dimmable lamp. Put it on a dimmer circuit and you risk flicker, buzz, or early failure. If the fixture is on a dimmer, either swap the control to a standard toggle or specify a dimmable A19 LED instead.
2) How do you set the color temperature on the Satco S11771 CCT selectable bulb?
The S11771 is field selectable between 3000K, 4000K, and 5000K, so one bulb covers warm white through daylight. That is what makes it useful for an MRO or property maintenance shelf: you stock one SKU and match whatever color the rest of the fixtures in that hallway or unit already are, instead of carrying three.
3) Can this A19 LED go in a fully enclosed ceiling fixture or a glass globe?
Yes, it is an enclosed rated lamp, so a flush mount glass globe, a jelly jar, or a closed drum fixture is fine. Many LED A19s are not enclosed rated and cook themselves in those fixtures, which is why this matters on apartment hallway and closet globes.
4) Is the Satco S11771 approved for a bathroom or a covered porch?
It carries a damp location rating and is listed for indoor use, so a bathroom, a covered laundry, or a vanity fixture is within spec. It is not a wet location lamp, so skip open exterior fixtures exposed to direct rain or sprinkler spray.
5) Does it matter whether this bulb is installed base up or base down?
No. Burning position is universal, so it can be run base up in a recessed can, base down in a pendant, or horizontal in a wall sconce without affecting rated life.
6) Will this bulb work in a 3-way lamp socket?
It will light, but not step. The S11771 is not a 3-way lamp, so in a 3-way socket it operates at a single output level only. For a 3-way table lamp you want a lamp specifically built as 3-way.
7) Does the Satco S11771 qualify for utility rebates through DesignLights Consortium?
No, this lamp is not DLC approved, so it will not qualify under rebate programs that require a DLC listing. If the project is being funded through a DLC-based utility incentive, you need a DLC listed lamp instead.
8) Is 90 CRI worth specifying for guest rooms and retail spaces?
The S11771 is a 90 CRI lamp, which renders skin tones, paint colors, and merchandise much closer to true than the 80 CRI bulbs typically sold for general service. For hospitality guest rooms, healthcare, and retail display that difference is visible; for a back-of-house storage room it is not worth paying attention to.
9) How wide does the light spread from this frosted A19?
Beam spread is 220 degrees with a frosted lens, so it throws light nearly all the way around rather than forward like a reflector lamp. That suits open fixtures, table lamps, and ceiling globes where you want even diffuse light. For a recessed can where you want a controlled downward beam, a BR or PAR reflector lamp is the better choice.
10) Can this Satco LED bulb be sold and installed in California?
Yes. Satco marks the S11771 as lawful for sale in California, so it can be specified on California projects without running into state lamp efficacy restrictions.
11) What is the bulb body made of, and how heavy is it?
Both the housing and the base are plastic, in a white finish, and each lamp weighs 0.08 lb. The plastic construction means no glass to break in a maintenance cart or a tenant-occupied unit, which matters on high-turnover multi-family relamps.
How fast can I get the Satco Lighting S11771 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11771 come with a warranty?
Absolutely. The Satco Lighting S11771 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11771?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11771 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.