SATCO Lighting S11776 12W A19 LED, Medium Base, CCT Selectable, White Finish, 90 CRI, 120V, 4 Pack

No. The S11776 is a non-dimmable lamp. On a dimmer circuit you can get flicker, buzz, or no light at all, and the dimmer itself can be damaged. Use it on standard on/off switched circuits only. It is also not a three-way lamp, so it won't step through levels in a 3-way socket base.

The S11776 is field selectable between 3000K warm white, 4000K neutral, and 5000K daylight, so one part number covers three color temperatures. That is what lets a property manager stock a single bulb and still match 3000K in apartments and 5000K in back-of-house areas. Set the selection before install, then confirm all lamps in a fixture group are on the same setting so the room reads consistent.

It stands in for a 75W incandescent A19 while drawing 12 watts at 120 volts, putting out 1100 lumens. Current draw is 0.100A, so a 15A circuit carries a large number of them without concern in a multi-family retrofit.

Yes, it's an enclosed rated lamp, so closed globes, jelly jars, and flush drum fixtures are fair game. It also carries a damp location rating, which covers bathrooms and covered porches, but it is an indoor lamp and should not go anywhere it takes direct water or weather.

Beam spread is 220 degrees, so light goes out sideways and back up past the widest point of the bulb, not just straight down. That is what you want in a table lamp, an open shade, or a globe fixture where you need the whole room lit. It can be burned in any position, base up, base down, or horizontal.

No, this lamp is not DLC listed, so it won't qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference and is marked lawful for sale in California.

The 90 CRI rating on this lamp means colors, skin tones, paint, and merchandise render close to how they look under natural light. For hospitality rooms, leasing offices, and retail displays that is the difference between a space looking flat and looking right. For a back hallway or mechanical room, a lower CRI lamp would do the same job.

S11776 ships as a 4 pack, rated at 10,000 average hours. For a common-area fixture running roughly 12 hours a day, that's a bit over two years between relamps, which is what makes it practical to standardize a building on one part number.

The lens is frosted and the housing is white, which diffuses the LED source rather than leaving visible diodes or glare. In open shades and clear globes where the bulb is in view, that matters more than lumens do.