SATCO Lighting S11792 12W A19 LED, Medium Base, CCT Selectable, 120V, White Finish

Yes. The S11792 is an enclosed rated lamp, so it can go in a closed globe, a jelly jar, or a flush ceiling fixture where heat builds up. It is also damp location rated and listed for indoor use, which covers a bathroom or a covered porch ceiling but not direct exposure to weather.

Five settings are built into the one lamp: 2700K, 3000K, 3500K, 4000K and 5000K. You select the color on the bulb itself before installing, so a property manager can stock a single SKU and still match warm 2700K in apartments and 4000K or 5000K in corridors, laundry rooms and back-of-house. CRI is 90, so colors render close to what they look like under incandescent.

Yes, the S11792 is dimmable on 120V, 60Hz line voltage. It is not a three-way lamp, so it will not step through levels in a three-way socket the way a 30/70/100 incandescent does. Current draw is 0.163A, which matters if you are counting lamps against the minimum load of an older dimmer.

Burning position is universal, so base-up, base-down, and horizontal are all fine. Combined with the enclosed rating, that covers recessed cans, ceiling drums, and sconces where the lamp lies on its side.

Each lamp pulls 0.163A at 120V, 12 watts. That is a small enough load that lamp count is rarely the limit on a standard 120V branch circuit; the fixture and the dimmer minimum load usually decide before the breaker does. Size the circuit against the total connected load of all fixtures, not the bulb alone.

The lens is polycarbonate with a white diffusing finish, and the base is polyamide. That is a plastic-bodied lamp rather than glass, which is worth knowing for tenant-occupied units, gyms, and stairwells where a glass envelope is a breakage risk.

Rated average life is 25,000 hours. At roughly 12 hours a day in a corridor or common area, that is several years between relamps, which is the case for switching a multi-family or hospitality property off incandescent A19 stock.