You may also like
SATCO Lighting S11791 8.8W A19 LED, Medium Base, CCT Selectable, 120V, White Finish
8.8 Watt A19 LED - Medium Base - CCT Selectable - 120 Volt - White Finish
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.121A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- Yes
- CRI:
- 90
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- White
- Lens Material:
- Polycarbonate (PC)
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Base Material:
- Polyamide (PA)
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 2700K/3000K/3500K/4000K/5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 8.8W
- Product Material:
- Polyamide (PA)
- Product Weight:
- 0.1 lb
Satco Lighting S11791 – Frequently Asked Questions
1) Will the Satco S11791 A19 LED work in a fully enclosed fixture?
Yes. The S11791 is an enclosed rated lamp, so it can go in a closed globe, jelly jar, or sealed ceiling fixture without cooking itself. It is rated for damp locations and listed for indoor use, so a covered porch or bath is fine but a wet, direct-rain location is not the right application.
2) How do I set the color temperature on the Satco S11791 CCT selectable bulb?
The S11791 is field selectable across five color temperatures: 2700K, 3000K, 3500K, 4000K and 5000K. You pick the setting on the lamp itself, so one part number covers a warm 2700K apartment unit and a 4000K back-of-house corridor. For property managers that means one SKU on the shelf instead of five, and no color mismatch when you re-lamp a room that was already done in a different temperature.
3) Can I put the Satco S11791 on a dimmer?
Yes, the S11791 is dimmable on 120V, 60Hz line power. What it will not do is act as a three-way bulb, so do not spec it for a socket wired for 50/100/150 three-way switching. If the fixture is on a three-way lamp switch, you want a three-way rated LED instead.
4) Does the Satco S11791 A19 have to be installed base down?
No. Burning position is universal, so it runs base up in a recessed can, base down in a table lamp, or horizontal in a sconce with no change to its rating. The 220 degree beam spread throws light back past the base, which is what you want in an open shade or a ceiling fixture.
5) Is 90 CRI good enough for retail or healthcare spaces?
The S11791 renders at 90 CRI, which is the threshold most retail, hospitality and patient-care specs call for when color accuracy matters (skin tones, merchandise, paint and finish matching). Standard-grade LED lamps typically sit at 80. Paired with the 3500K or 4000K setting, this is the lamp for a space where people judge color under it.
6) What is the Satco S11791 bulb made of, and is the housing plastic or glass?
It is a plastic-bodied lamp, not glass. The lens is polycarbonate with a white diffused finish and the base is polyamide. No glass envelope to shatter is the reason these get spec'd for multi-family units, school corridors, and any fixture within reach of the public.
7) Can the Satco S11791 be sold and installed in California?
Yes. The S11791 carries a lawful for sale designation for California, and it is FCC compliant, which covers the RF emissions requirement that applies to the driver electronics in an LED lamp.
8) How many of these 8.8W LED bulbs can I put on one 20 amp lighting circuit?
Each S11791 draws 0.121 amps at 120V. Loading a 20 amp circuit to the 16 amp continuous limit gives you room for well over a hundred lamps, so on a re-lamp from 60W incandescent the existing branch circuit is nowhere near a constraint. The practical limit becomes the dimmer's minimum load and fixture count, not the breaker.
How fast can I get the Satco Lighting S11791 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11791 come with a warranty?
Absolutely. The Satco Lighting S11791 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11791?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11791 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.