SATCO Lighting S11450 5W A19 LED, 2700K, Dimmable, Medium Base, 230 degree Beam Angle, 4-Pack

Yes, the S11450 is a dimmable 5 watt A19 LED. It needs an LED-compatible dimmer; older incandescent dimmers sized for much higher wattage loads often sit below their minimum load with a single 5 watt lamp, which shows up as flicker or a limited dimming range.

2700K is the warm white color temperature that matches a standard incandescent or halogen A19, so it blends with existing incandescent fixtures. If the other lamps in the space are 3000K or 4000K, this one will read noticeably warmer and yellower side by side.

Yes. The 230 degree beam angle means light is thrown well past the sides of the lamp rather than straight forward, so it behaves like an omnidirectional incandescent in open shades, table lamps, and ceiling fixtures. It is not a reflector lamp and will not give you a controlled downward beam for recessed or track use.

The S11450 ships as a 4-pack of 5 watt A19 LED lamps, which is how it is sold for MRO and multi-unit restocking. Each lamp in the pack is the frost finish version.

A19 is the standard pear-shaped bulb envelope at roughly 2-3/8 inches in diameter, so the S11450 goes into the same shades, harps, and enclosures as the A19 incandescent it replaces, using the same medium screw base. The only thing to watch is fully enclosed fixtures, where heat build-up shortens LED life unless the lamp is rated for enclosed use.

Frost. The glass is diffused rather than clear, which softens the look of the diodes and makes it the better choice for exposed-bulb fixtures and open shades where a clear lamp would show hot spots.