SATCO Lighting S11451 5W A19 LED, 3000K, Dimmable, Medium Base, 230 degree Beam Angle, 4-Pack

Yes, the S11451 is a dimmable 5 watt A19 LED. It needs a dimmer that is rated for LED loads, since legacy incandescent dimmers often leave LEDs flickering or humming at the low end of the range.

3000K is warm white, a little crisper than the yellow of a classic incandescent (around 2700K) but still clearly warm rather than neutral or daylight. For a property manager standardizing corridors, units, or guest rooms, mixing 3000K and 2700K bulbs in the same sightline will read as a visible color mismatch, so keep a floor or a building on one temperature.

The S11451 ships as a 4-pack of 5 watt A19 LEDs, all frost finish. That makes it practical for re-lamping a multi-head fixture or a small batch of units in one order.

Yes. At 230 degrees the S11451 throws light nearly all the way around the bulb rather than forward only, so it works as general ambient lighting in ceiling fixtures, sconces, and lamps. If you need light aimed down onto a counter or a display, a reflector lamp such as a BR or PAR LED is the better choice, not a wide-angle A19.

The 5 watt draw is far below any incandescent fixture rating, so it is electrically safe in sockets labeled for 40W, 60W, or more. Watts no longer tell you brightness with LED, so match on lumens and on the 3000K warm white tone rather than assuming a wattage equivalence.

Frost. The diffused envelope softens the LED chips and spreads the light, which matters in open shades and exposed-bulb fixtures where a clear bulb would show hot spots and glare. If you want visible filament detail, this is not the bulb for it.