SATCO Lighting S11493 10/22/34...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$18.50
Satco Lighting SAT-S11493 10/22/34 Watt PS25 LED Three-Way Lamp - E39d Mogul Base - 5000K - White Finish - 120 Volt

SATCO Lighting S11493 10/22/34W PS25 LED Three-Way Lamp, E39d Mogul Base, 5000K, White Finish, 120V

(No reviews yet) Write a Review

Model: S11493
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$18.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11493 10/22/34W PS25 LED Three-Way Lamp, E39d Mogul Base, 5000K, White Finish, 120V

10/22/34 Watt PS25 LED Three-Way Lamp - E39d Mogul Base - 5000K - White Finish - 120 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.083/0.183/0.283A
Avg Rated Hours:
25000
Burning Position:
Universal
CA Web Text:
Lawful for sale
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Mogul DC
Lamp Filament:
LED
Lamp Shape:
PS25
Lens Finish:
Opal
Lens Material:
Plastic
Lumens:
1300L/2900L/4100L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
Yes
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
100W/200W/300W
Location Rating:
Damp
Base Material:
Metal
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
220
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
10W/22W/34W
Product Material:
Metal
Product Weight:
0.57 lb
Department:
Electrical

Satco Lighting S11493 – Frequently Asked Questions

1) Will the Satco S11493 three-way LED work in my existing mogul base three-way floor lamp socket?
It fits a mogul three-way socket. The S11493 uses a Mogul DC (E39d) base, which is the double-contact mogul base a three-way mogul fixture uses, and it is built as a true three-way lamp stepping 10W/22W/34W. If your lamp has a standard medium screw socket, this is the wrong bulb.
2) Can I put this Satco mogul base LED on a dimmer?
No. The S11493 is not dimmable. Level changes come from the three-way socket itself, not from a wall or lamp dimmer, and running it on a dimmer circuit is not a supported use.
3) Is this PS25 LED lamp safe in a fully enclosed fixture?
Yes, it is an enclosed rated lamp, so closed globes and enclosed torchiere shades are fine. It also carries a damp location rating and can be burned in any position, base up, base down or horizontal.
4) Can I use the Satco S11493 outdoors in a post light or porch fixture?
It is an indoor lamp with a damp location rating only. That covers a covered porch or a damp interior space, but not a wet location such as an open post top or anywhere exposed to direct rain.
5) What does 5000K look like, and will it match the other lamps in my building?
5000K is a cold daylight white, closer to noon sun than the warm yellow of an incandescent. If the rest of your fixtures are 2700K or 3000K, this lamp will read noticeably blue-white next to them. Color is fixed, there is no selectable CCT switch on it, and it renders at 80 CRI.
6) Is the Satco S11493 worth specifying for a hospitality or multi-family relamp?
For guest room and common area floor lamps with mogul three-way sockets, it is rated 25,000 average hours against roughly a thousand for the incandescent it replaces, which is the whole argument for a bulk relamp. It is FCC compliant and lawful for sale in California. It is not DLC listed, so it will not qualify for utility rebates written against the DLC list.
7) Does this Satco lamp throw light in all directions like the incandescent it replaces?
Close to it. The beam spread is 220 degrees through an opal plastic lens with a white housing, so it washes light out and down the way an omnidirectional PS25 incandescent does. Good for shaded floor lamps and open globes where a directional LED would leave the shade dark.
8) Is the base on this LED bulb metal or plastic?
Metal base, plastic opal lens. The metal mogul shell threads into the socket the same way the incandescent did, so there is no adapter needed on an existing E39d three-way fixture.
How fast can I get the Satco Lighting S11493 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11493 come with a warranty?
Absolutely. The Satco Lighting S11493 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11493?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11493 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!