SATCO Lighting S11552 5.5W LED PL 2-PIN Dual Mode, 3500K, 500 Lumens, GX23 Base, Type A/B Ballast Dependent or Ballast Bypass
5.5 Watt LED PL 2-PIN Dual Mode - 3500K - 500 Lumens - GX23 base - 50000 Average rated hours - 120 deg. Beam Angle - Type A/B Ballast Dependent or Ballast Bypass - 120-277 Volt
Manufacturer Resources
Product Specs
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- Dimmable:
- Non-Dimmable
- Product Weight:
- 0.11 lb
- Product Material:
- Glass / Plastic
- CRI:
- 80+
- Lumens:
- 500L
- Department:
- Electrical
- Product Type:
- LED Lamp
Satco Lighting S11552 – Frequently Asked Questions
1) Will the Satco S11552 LED PL lamp work if I leave the existing ballast in place?
Yes. The S11552 is a dual mode lamp, so it runs either ballast dependent on a Type A/B ballast or wired direct to line voltage as a ballast bypass. If the ballast is still good, drop it in as-is; when that ballast eventually fails, rewire the socket to line voltage and keep the same lamp instead of buying a different one.
2) What voltage can I run the Satco S11552 on for a ballast bypass install?
120 to 277 volt. That covers both 120V residential and commercial circuits and 277V lighting circuits common in office and institutional buildings, so the same lamp can be standardized across a facility running both.
3) How much light does the 5.5W Satco S11552 put out compared to the CFL it replaces?
500 lumens at 5.5 watts. That output sits in the range of a 13 watt 2-pin CFL PL lamp, so you get comparable light at roughly a third of the draw. Beam spread is 120 degrees, so it distributes broadly rather than throwing a spot.
4) Is 3500K the right color for matching existing fixtures in a building?
The S11552 is 3500K, a neutral white that sits between warm 3000K and cool 4000K. It is the common spec in offices, corridors, and healthcare, so it usually matches an existing commercial retrofit. If the other cans in the space are 3000K or 4000K, the difference will read on the wall, so match the number rather than the description.
5) How long does the Satco S11552 LED PL lamp last before relamping?
50,000 average rated hours. For a maintenance schedule, a fixture running 12 hours a day works out to roughly 11 years, which is the argument for retrofitting a stairwell or corridor CFL fixture rather than restocking PL tubes.
How fast can I get the Satco Lighting S11552 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11552 come with a warranty?
Absolutely. The Satco Lighting S11552 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11552?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11552 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.