SATCO Lighting S11554 5.5W LED PL 2-PIN Dual Mode, 5000K, 550 Lumens, GX23 Base, Type A/B Ballast Dependent or Ballast Bypass
5.5 Watt LED PL 2-PIN Dual Mode - 5000K - 550 Lumens - GX23 base - 50000 Average rated hours - 120 deg. Beam Angle - Type A/B Ballast Dependent or Ballast Bypass - 120-277 Volt
Manufacturer Resources
Product Specs
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- CRI:
- 80+
- Lumens:
- 550L
- Product Material:
- Glass / Plastic
- Dimmable:
- Non-Dimmable
- Product Weight:
- 0.13 lb
- Department:
- Electrical
- Product Type:
- LED Lamp
Satco Lighting S11554 – Frequently Asked Questions
1) Will the Satco S11554 LED PL lamp work if I leave my existing CFL ballast in place?
Yes. The S11554 is a dual mode (Type A/B) lamp, so it runs off a compatible existing ballast or, once the ballast is removed and the sockets are wired to line voltage, it runs direct on 120-277 volts. That lets you swap lamps now and bypass the ballast later when it fails, without changing part numbers.
2) How bright is the 5.5W Satco PL LED and what color does it throw?
550 lumens at 5.5 watts, in 5000K. 5000K is a crisp daylight white, which reads noticeably cooler and bluer than 3500K or 4100K lamps. If the rest of a corridor or stairwell is on warmer PL lamps, mixing this one in will be visible.
3) How long does the Satco S11554 LED PL lamp last compared to the CFL it replaces?
Rated at 50,000 average hours. For a property manager running common-area fixtures near around-the-clock, that is a relamp interval measured in years rather than the annual or biannual cycle typical of a compact fluorescent PL, which is usually where the labor savings come from on a building-wide changeover.
4) Can I run the Satco S11554 on 277 volt circuits in a commercial building?
Yes, in ballast bypass mode it accepts 120-277 volts, so the same lamp covers 120V residential and multi-family circuits and 277V commercial lighting branches. That is why it works as a single standardized stock item across a mixed portfolio.
5) Is this Satco PL lamp suitable for a downlight or a wall sconce spread?
The beam angle is 120 degrees, which is a wide wash rather than a spot. That suits recessed PL downlights, sconces, and vanity fixtures where you want even fill, not a fixture where you need a tight pool of light.
6) What finish does the Satco 5.5W GX23 LED PL come in?
Frost. The frosted lens diffuses the LED sources so you do not see individual diodes through an open or louvered fixture, closer to the look of the fluorescent twin tube it replaces.
How fast can I get the Satco Lighting S11554 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11554 come with a warranty?
Absolutely. The Satco Lighting S11554 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11554?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11554 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.