SATCO Lighting S11632 12W LED Direct Wire Downlight, 3.5in, 3000K, 120V, Dimmable, Round, Remote Driver, Brushed Nickel

The driver is a separate component that sits away from the light head rather than inside the trim, which is why the fixture body stays shallow at 3 inches. You wire it as a 120 volt direct wire fixture at 60Hz, so there is no lamp socket or screw base to feed it from, it's an integrated LED. Plan on somewhere in the ceiling cavity or a J-box for the driver to sit, and follow Satco's installation sheet for the connection.

It carries a Wet location rating, so a shower or tub enclosure is fair game. Satco classifies it as an indoor fixture though, so use it for wet interior spaces rather than treating it as an exterior soffit light.

No. The S11632 is fixed at 3000K and fixed at 12 watts, with no CCT selector and no wattage selector switch. If you're standardizing a property, every unit you order in this model will read the same warm white, which is helpful for matching, but you can't field-adjust one to sit next to a 3500K or 4000K run. For mixed-temperature jobs you'd want a selectable-CCT downlight instead.

You don't relamp them. The LED is integrated into the fixture, rated for 50,000 average hours. Run 12 hours a day and that's over 11 years before the rated point, so for a property manager the maintenance line item is replacement of the whole unit, not bulbs.

One finish only, brushed nickel, on an aluminum base. The trim is round and Satco calls the styling utility, so it's a plain functional ring rather than a decorative baffle. If you need white or black trim to match existing openings, this model won't get you there.