SATCO Lighting S11646 12.5W LED High Lumen Downlight Retrofit, 5-6in, 27K/30K/35K/40K/50K CCT Selectable, 120V, Dimmable

Color temperature is selectable on the fixture itself: 2700K, 3000K, 3500K, 4000K and 5000K. You order one part number, S11646, and pick the Kelvin at install with the switch on the unit. For a property manager standardizing a building, that means one item on the shelf whether the lobby wants 2700K warm and the parking level wants 5000K.

The S11646 carries a wet location rating, so it can go in a shower can or over a tub. Satco classes it as an indoor product, so use it in wet interior locations rather than treating it as an exterior fixture. It is cULus Classified and cULus Listed.

Yes, the S11646 is listed as Title 24 compliant, which is what a contractor needs on residential and multi-family work in California. It is also RoHS compliant and FCC compliant.

No lamp to buy. The LED is integrated into the module with an integrated base, so the light source and driver come as one assembly. When it reaches end of life you replace the whole retrofit, not a bulb. Rated at 50,000 hours.

A retrofit like the S11646 drops into the existing can and keeps the ceiling intact, which is why it wins on occupied units and finished ceilings. It covers 5 inch and 6 inch apertures with a 7.36 inch trim, so it hides minor aperture damage. Pull the housing instead when the can is not rated for the location you need, when you are changing aperture size, or when the ceiling is already open. On a wet location like a shower, this module is already wet rated, so the can swap is usually unnecessary.

White is the only finish offered on the S11646, so a fleet order matches itself with no finish decision to make. The trim is a 7.36 inch diameter round; the body is aluminum.