SATCO Lighting S11880 9W LED, Fire Rated, 4in Direct Wire Directional Downlight, Round Shape, CCT Selectable, Dimmable, 120V

Fire rated is part of what the S11880 is, so it's built to go into a rated ceiling assembly rather than needing a separate fire hood over it. It's a 9W direct wire directional downlight, cETLus Listed, and California Title 24 listed for jobs where T24 compliance is on the drawings.

Direct wire. The S11880 has an integrated LED, so there's no socket and no screw-in Edison adapter, it lands on 120V line voltage at 60Hz and mounts to the ceiling. That means an electrician or a junction box connection, not a lamp swap. The driver is remote rather than sitting in the trim.

The S11880 is CCT selectable across 2700K, 3000K, 3500K, 4000K and 5000K, set at the fixture during install. For a property manager standardizing a corridor or a unit turn, that means one part number covers the warm 2700K look in residential spaces and 4000K or 5000K in back-of-house, and you can dial a replacement to match whatever the neighboring fixtures are already running.

Wet location rated, so a shower or tub enclosure is within what the S11880 is rated for. It's an indoor fixture, so use it in wet interior spaces (bathrooms, locker rooms, covered laundry) rather than on an exposed exterior soffit.

Dimmable at 120V, and the output is 650 lumens from 9 watts. That's a general-purpose downlight level, comparable to what people expect from a small recessed can, and it's directional, so the light is aimed rather than spread flat. It's a fixed 9W, not wattage selectable, so lumen output doesn't change with a switch setting.

Rated for 50,000 hours. In a common-area corridor running roughly 12 hours a day, that's on the order of a decade before relamping, which is the argument for spec'ing it in a stairwell or hallway where getting a ladder up there is the expensive part. The LED is integrated, so at end of life the whole fixture comes out, not a lamp.

Both. The S11880 is RoHS compliant and FCC compliant, and carries a cETLus Listing for US and Canadian use. Combined with the California Title 24 listing, that covers the paperwork most public agency and healthcare submittals ask for on a recessed LED fixture.

White is the only finish offered on the S11880, with an aluminum base. Round shape, utility styling. The aluminum matters for heat: it's the path the LED sheds heat through, which is part of holding the 50,000 hour rating in an insulated ceiling.

Satco publishes both for the S11880: install instructions at assets.satco.com under products/S11880, and the photometric spec sheet at media.satco.com/specsheets/pdf/S11880.pdf. Worth pulling the spec sheet before a submittal, since a fire rated direct wire downlight usually needs the listing documentation attached.