SATCO Lighting S11976 12W, 48i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.93
Satco Lighting SAT-S11976 12 Watt - 48 Inch - T8 LED - G13 base - Dual Mode Hybrid Type A/B - 4000K - 1800 Lumens

SATCO Lighting S11976 12W, 48in, T8 LED, G13 Base, Dual Mode Hybrid Type A/B, 4000K, 1800 Lumens

(No reviews yet) Write a Review

Model: S11976
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11976 12W, 48in, T8 LED, G13 Base, Dual Mode Hybrid Type A/B, 4000K, 1800 Lumens

12 Watt - 48 Inch - T8 LED - G13 base - Dual Mode Hybrid Type A/B - 4000K - 1800 Lumens

Manufacturer Resources

Product Specs

Amps:
0.100-0.043A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast required (Type A) or Ballast Bypass (Type B)
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Filament:
LED
Lamp Shape:
T8
Lens Finish:
Frost
Lens Material:
Glass
Lumens:
1800L
Operating Frequency:
50/60Hz
Product Type:
Linear
Three-Way:
No
Warranty:
5 Year Limited - T8 LED Bulbs
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Medium Bi Pin
Incandescent Equivalent:
50W
Location Rating:
Damp
CRI:
82
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
210
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
12W
Department:
Electrical

Satco Lighting S11976 – Frequently Asked Questions

1) Can I drop the Satco S11976 T8 LED tube into my existing fluorescent fixture without rewiring it?
Yes. The S11976 is a dual mode hybrid Type A/B lamp, so it will run on an existing compatible fluorescent ballast (Type A) or you can bypass the ballast and wire line voltage directly to the sockets (Type B). That means you can relamp now and convert to direct wire later when the ballast fails, without buying a different tube.
2) Does this 48 inch LED tube fit standard T8 bi-pin sockets?
It uses a G13 medium bi-pin base in a 48 inch T8 shape, the same lampholder spacing as a standard 4 foot F32T8 fluorescent tube, so it seats in existing T8 tombstones. For Type B operation those sockets get rewired to line voltage, but the lamp itself needs no socket change.
3) Can this T8 LED tube go in an enclosed or gasketed wraparound fixture?
Yes, it is an enclosed rated lamp, so sealed lensed wraps and gasketed fixtures are fine, where many LED tubes are not. Location rating is damp and indoor only, which covers parking garages, covered walkways, and laundry or utility rooms, but not direct wet exposure.
4) What voltage can this Satco T8 LED tube run on for a 277V commercial panel?
The S11976 accepts 120V through 277V at 50/60Hz, drawing 0.100 to 0.043A depending on where in that range you land. The same lamp works on 120V residential circuits and 277V commercial lighting branch circuits.
5) Is this tube dimmable or three-way?
No. The S11976 is not a three-way lamp, and as a hybrid Type A/B tube it is built for straight on/off operation on either a fluorescent ballast or direct line voltage. If the space needs dimming, specify a dimmable LED tube with a matched driver or dimming ballast instead.
6) Can I mount this tube vertically in a stairwell fixture?
Burning position is universal, so the lamp can be installed horizontally, vertically, or at any angle without affecting rated performance. That makes it usable in stairwell and wall-mounted strip fixtures as well as standard overhead troffers.
7) Is the lens on this Satco LED tube glass or plastic, and will it glare?
The tube has a frosted glass lens over a white housing, and the frost diffuses the diodes so you see a soft line of light rather than individual points. Beam spread is 210 degrees, so light wraps well past straight-down and fills a reflector-style troffer.
How fast can I get the Satco Lighting S11976 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11976 come with a warranty?
Absolutely. The Satco Lighting S11976 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11976?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11976 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!