SATCO Lighting S12245 7W, AR111, COB LED, 600 Lumens, G53 Base, 80 CRI, 3000K, 12V, 36 Degree, Floodlight Bulb
7 Watt - AR111 - COB LED - 600 Lumens - G53 Base - 80 CRI - 3000K - 12 Volt - 36 Degree - Floodlight Bulb
Manufacturer Resources
Product Specs
- Amps:
- 0.583A
- Avg Rated Hours:
- 30000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Filament:
- LED
- Lamp Shape:
- AR111
- Lens Finish:
- Clear
- Lens Material:
- Plastic (PS)
- Lensed:
- Yes
- Lumens:
- 600L
- Operating Frequency:
- 60Hz
- Product Type:
- AR
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- G53
- Base Material:
- Plastic
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 12V
- Beam Spread Angle:
- 36
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 7W
- Product Material:
- Plastic
- Product Weight:
- 0.38 lb
Satco Lighting S12245 – Frequently Asked Questions
1) Will the Satco S12245 AR111 lamp work on a 120V line-voltage track or socket?
No. The S12245 is a 12 volt lamp and needs a 12V transformer or driver feeding the G53 socket. Wired straight to 120V line voltage it will fail. If your fixture is line voltage, you need a 120V lamp instead, not this one.
2) Can the Satco S12245 AR111 LED be put on a dimmer?
No, it is a non-dimmable lamp. Installed on a dimming circuit expect flicker, buzz, or early failure. For a low-voltage dimmed display or hospitality install, specify a dimmable AR111 and a compatible 12V electronic transformer.
3) Can I use the Satco S12245 in a covered outdoor soffit or a bathroom?
It is rated for damp locations and listed as an indoor lamp, so a covered soffit, a bath, or a cooler area with condensation is acceptable. Do not use it anywhere exposed to direct rain or spray, which needs a wet-rated lamp and fixture.
4) Is a 36 degree beam right for general retail display lighting, or should I use a narrower spot?
36 degrees is a flood beam, so it washes a wider area, good for shelving, artwork groupings, and general accent fill. If you want a tight punch on a single object or a long throw from a high ceiling, a narrower beam AR111 gives more center-beam intensity. The S12245 puts out 600 lumens at 3000K across that 36 degree spread.
5) Will this AR111 LED match the color of the halogen AR111 lamps already in my other fixtures?
At 3000K it reads warm white, close to halogen in tone, with 80 CRI color rendering. It is a fixed color temperature lamp, not color selectable, so every unit in the fleet lands at the same 3000K. If the rest of your building is on 2700K, expect a visible difference side by side.
6) What halogen AR111 wattage does this 7W LED replace?
It is rated as a 60 watt incandescent equivalent at 600 lumens, so it swaps in for lower-output halogen AR111 lamps on the same 12V G53 socket. If you are replacing a 50W or 75W halogen AR111 and want the same punch, check the lumen output of what is coming out before you standardize on this one.
7) Does this Satco AR111 lamp qualify for California Title 24?
Yes, the S12245 is Title 24 compliant and FCC compliant. It is not DLC listed, so if your utility rebate program requires a DLC listing, this lamp will not qualify for it.
8) Does the S12245 need to be aimed in a particular direction, or can it run base-up?
Burning position is universal, so it can run base-up, base-down, or horizontal in a track head, recessed can, or gimbal without affecting life. Rated average life is 30,000 hours.
9) What is the S12245 AR111 lamp made of, and does it have a lens?
The body is white with a plastic G53 base, and it is lensed with a clear polystyrene lens over the COB LED. Clear lens means a defined beam and a visible source, so in low-mounted or sightline-sensitive positions you may want a frosted or louvered trim to cut glare.
How fast can I get the Satco Lighting S12245 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12245 come with a warranty?
Absolutely. The Satco Lighting S12245 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12245?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12245 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.