You may also like
SATCO Lighting S12401 5W LED A15, Clear, Medium Base, 3000K, 90 CRI, 120V
5 Watt LED A15 - Clear - Medium Base - 3000K - 90 CRI - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- Product Material:
- Aluminum / Glass
- Product Weight:
- 0.05 lb
- CRI:
- 90+
- Lumens:
- 450L
- Dimmable:
- Yes-Dimmable
- Department:
- Electrical
- Product Type:
- LED Lamp
Satco Lighting S12401 – Frequently Asked Questions
1) Is the Satco S12401 A15 dimmable on a standard wall dimmer?
The S12401 is a dimmable LED, so it can run on a dimmer rather than only full-on. Use an LED-compatible (electronic low-voltage or LED/CFL rated) dimmer; a 5 watt load is low, so a single lamp on an old incandescent-rated dimmer may flicker or not reach the bottom of the range.
2) Will a 3000K clear LED bulb match the warm white bulbs already in my building?
3000K is warm white, a step whiter than the 2700K soft white most residential incandescent and LED replacements use. If your other fixtures are 2700K, the S12401 will read slightly cooler and the mismatch is visible side by side in the same room. If you are standardizing on 3000K, it matches.
3) Does the clear glass on the Satco S12401 show the LED filament, and where does that matter?
The lamp is clear rather than frosted, so the light source is visible through the glass and you get a sparkle effect plus harder shadows. That suits exposed-bulb sconces, chandeliers, and decorative fixtures where the lamp is seen. For a bare socket in a closet or a shade that leaves the bulb in view at eye level, a frosted A15 is the kinder choice.
4) Is 90 CRI worth specifying for a hospitality or retail space?
The S12401 is rated 90+ CRI, which renders color noticeably more accurately than the 80 CRI commodity LEDs most multifamily and MRO stock runs on. That matters in guest rooms, lobbies, dining, retail display, and anywhere skin tones and finishes are on show. For back-of-house and corridors the difference rarely justifies a separate SKU.
5) What is the Satco S12401 bulb made of, and can it go in a ceiling fan?
Construction is aluminum and glass, with the aluminum serving as the heat sink. A15 lamps are the standard size for ceiling fan light kits, and at 0.05 lb the bulb adds essentially no weight to the fixture. For fan use, confirm the kit's socket is medium base rather than candelabra.
6) Can I use the S12401 LED A15 in an enclosed fixture or outdoor post light?
Enclosed-fixture and wet-location suitability are not among the ratings carried for the S12401, so treat it as a 120 volt interior lamp. For a sealed outdoor post or a fully gasketed enclosure, specify a lamp that explicitly states enclosed-fixture rated and a damp or wet location listing.
How fast can I get the Satco Lighting S12401 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12401 come with a warranty?
Absolutely. The Satco Lighting S12401 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12401?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12401 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.