You may also like
SATCO Lighting S12426 11W LED A19, Soft White, Medium Base, 2700K, 90 CRI, 120V
11 Watt LED A19 - Soft White - Medium Base - 2700K - 90 CRI - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.092A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Soft White
- Lens Material:
- Glass
- Lumens:
- 1100L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 11W
- Product Weight:
- 0.08 lb
- Product Material:
- Aluminum / Glass
- Country of Origin:
- China
Satco Lighting S12426 – Frequently Asked Questions
1) Will the Satco S12426 LED A19 work in an enclosed ceiling fixture or a damp bathroom?
Yes on both counts. The S12426 is an enclosed rated lamp, so it can go in a fully enclosed dome or jar fixture without voiding its rating, and it carries a Wet location rating for indoor or outdoor use. That covers closed porch lanterns, shower trims, and enclosed stairwell fixtures, which is where most standard A19 LEDs fail early.
2) Is 90 CRI at 2700K warm enough to match the incandescent bulbs already in my building?
2700K is the warm, yellow-white color point incandescent bulbs produce, and at 90 CRI color rendering is high enough that wood tones, paint, and skin tones read close to what an incandescent gave you. For hospitality, residential rentals, and retail where mismatched color gets noticed, that combination is what makes a changeover look consistent. The lamp is not CCT selectable, so every unit is fixed at 2700K, which is what you want for fleet standardization.
3) Is this Satco 11W LED A19 dimmable on an existing wall dimmer?
The S12426 is a dimmable lamp on 120V, 60Hz line voltage. It is not a three-way bulb, so don't put it in a three-way socket expecting three levels, and because it is an LED filament lamp you want an LED-rated dimmer rather than an old incandescent rheostat for smooth low-end performance.
4) Can I install this LED filament A19 base up in a can light or sideways in a sconce?
Burning position is universal, so base up, base down, or horizontal are all fine. That matters for wall sconces and recessed cans where a position-restricted lamp would run hot and shorten life. Rated average life is 15,000 hours.
5) Will this bulb light a whole room or does it throw a narrow beam?
Beam spread is 320 degrees, essentially omnidirectional. It throws light up and sideways as well as down, so it works in open shades, bare-socket fixtures, and table lamps where a directional reflector lamp would leave the upper shade dark. If you need a tight downward beam in a recessed can, a BR or PAR lamp is the better choice.
6) Does this Satco LED A19 qualify for DesignLights Consortium utility rebates?
No. The S12426 is not DLC approved, so it won't qualify under programs that require a DLC listing. It is FCC compliant and marked lawful for sale in California. For rebate-driven projects, verify your utility's accepted product list before you commit the order.
7) Is the Satco S12426 a glass bulb or plastic?
Glass. The lens is glass with a soft white finish, and the lamp is built from aluminum and glass with an LED filament inside. The soft white coating diffuses the filament so you don't get the bare-filament glare of a clear vintage-style bulb.
How fast can I get the Satco Lighting S12426 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12426 come with a warranty?
Absolutely. The Satco Lighting S12426 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12426?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12426 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.