You may also like
SATCO Lighting S12412 5W LED A19, Soft White, 2700K, Medium Base, 90 CRI, 120V
5 Watt LED A19 - Soft White - 2700K - Medium base - 90 CRI - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.042A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Soft White
- Lens Material:
- Glass
- Lumens:
- 450L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 40W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 5W
- Country of Origin:
- China
- Product Weight:
- 0.07 lb
- Product Material:
- Aluminum / Glass
Satco Lighting S12412 – Frequently Asked Questions
1) Can the Satco S12412 LED A19 bulb go in an enclosed fixture?
Yes. The S12412 is an enclosed rated lamp, so it can be installed in a closed globe, jelly jar, or sealed ceiling fixture where most standard LED A19s are not permitted. It is also wet location rated and listed for both indoor and outdoor use, which covers covered porches and exterior fixtures exposed to weather.
2) Will the Satco S12412 work on a dimmer switch?
The S12412 is a dimmable LED, running on 120V at 60Hz and drawing 0.042 amps. Because the draw per lamp is so low, a dimmer with a minimum load can misbehave when only one or two bulbs are on the circuit, so check the dimmer's stated minimum LED load and use an LED-rated dimmer.
3) Is a 90 CRI bulb worth it for guest rooms and retail spaces?
That is the reason to pick this one. The S12412 renders at 90 CRI, well above the 80 CRI typical of commodity LED A19s, so skin tones, wood finishes, and merchandise colors read accurately. Paired with the 2700K soft white color, it gives the warm incandescent look hospitality and residential properties usually want.
4) Can the Satco S12412 be installed base-up in a recessed can or ceiling fixture?
Yes, burning position is universal, so base-up, base-down, or horizontal all work. Combined with the enclosed rating, that covers recessed cans, ceiling flush mounts, and sconces without any orientation restriction.
5) Will the Satco S12412 work in a three-way lamp socket?
No. The S12412 is not a three-way lamp, so in a three-way socket it will run at one output level and the low/medium/high switching will not function. For three-way table and floor lamps you need a bulb specifically built as three-way.
6) Is the Satco S12412 a filament-style bulb you can leave exposed in an open fixture?
It is an LED filament lamp with a glass lens in a soft white finish, built on aluminum and glass. The soft white coating diffuses the filament rather than leaving it clear, so in an exposed chandelier or pendant you get an even glow instead of visible filament strips. Beam spread is 320 degrees, close to omnidirectional.
7) How long will the Satco S12412 last in a common-area fixture that runs long hours?
Average rated life is 15,000 hours. At 12 hours a day in a corridor or lobby that is roughly three and a half years of service before relamping, and at 5 watts each the operating draw is low enough that a large fixture count stays well within circuit capacity.
8) Does the Satco S12412 offer selectable color temperature?
No, it is a fixed 2700K soft white lamp with no CCT selection switch. If you are standardizing a building on one warm color, that is an advantage since nobody can set a fixture to the wrong temperature; if you need 3000K or 4000K in the same part number, this is not the bulb.
9) Does the Satco S12412 qualify for a DesignLights Consortium utility rebate?
It is not DLC approved, so it will not qualify under DLC-based commercial rebate programs. It is FCC compliant and carries the California lawful-for-sale designation, so it can be shipped and installed in California work.
How fast can I get the Satco Lighting S12412 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12412 come with a warranty?
Absolutely. The Satco Lighting S12412 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12412?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12412 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.