You may also like
SATCO Lighting S12408 5W LED A19, Clear, Medium Base, 2700K, 90 CRI, 120V
5 Watt LED A19 - Clear - Medium Base - 2700K - 90 CRI - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.042A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Clear
- Lens Material:
- Glass
- Lumens:
- 450L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 40W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 5W
- Product Weight:
- 0.07 lb
- Product Material:
- Aluminum / Glass
Satco Lighting S12408 – Frequently Asked Questions
1) Can the Satco S12408 LED A19 filament bulb go in a fully enclosed fixture?
Yes. The S12408 is an enclosed rated lamp, so it can be installed in sealed or enclosed fixtures like flush mounts, jelly jars, and lanterns without the heat buildup that shortens the life of non-rated LEDs. It also carries a wet location rating and is listed for both indoor and outdoor use, so covered porches and exterior fixtures are fair game.
2) What incandescent wattage does this 5W Satco LED A19 replace?
It replaces a standard 40 watt incandescent A19, putting out 450 lumens at 5 watts on 120 volts. The 2700K color is the same warm white people expect from the old 40W bulb, so it will not look cooler or bluer than what you are pulling out.
3) Is this Satco clear LED filament A19 dimmable?
Yes, the S12408 is a dimmable lamp. It is not a three-way bulb, so it will not step through levels in a three-way socket; it needs a dimmer on the circuit to vary output.
4) Why choose a 90 CRI bulb like this one for a hospitality or retail space?
The 90 CRI rating means colors render close to natural light, which matters where guests or shoppers judge fabric, food, wood tone, or skin tone. Paired with the 2700K warm color and a clear glass lens over LED filaments, the S12408 gives the visible-filament look people expect in exposed-bulb fixtures rather than the flat diffused glow of a frosted LED.
5) How wide does this clear LED filament A19 throw light, and is it good for open chandeliers?
Beam spread is 320 degrees, so it lights nearly all the way around rather than pushing light in one direction. That suits open chandeliers, sconces, pendants, and bare-socket fixtures where the bulb is seen from every side.
6) How long does the Satco S12408 last and what current draw should I figure per lamp?
Average rated life is 15,000 hours, and each lamp draws 0.042 amps at 120V. That current figure is what you want when you are loading up a long run of decorative sockets and need to know how many you can hang on one circuit.
7) Can I buy and install this Satco LED A19 in California?
Yes. The S12408 is marked lawful for sale in California, and it is FCC compliant. Note it is not DLC listed, so if a utility rebate program on your project requires DLC qualification, this lamp will not satisfy that line item.
8) Is this bulb a color-changing or tunable-white lamp?
No. The S12408 is fixed at 2700K warm white; it has no CCT selector switch. If you are standardizing a building and want one color across every fixture, that is an advantage, but you cannot field-adjust it to 3000K or 4000K.
9) What is this Satco filament bulb made of, and will it hold up in a rental unit?
Construction is aluminum and glass with a glass lens over LED filaments. It is a glass envelope, not a plastic-shell LED, so handle it like a traditional bulb. For a property with high-traffic tenant turnover in open fixtures, the 15,000 hour rated life is the tradeoff against the glass body.
How fast can I get the Satco Lighting S12408 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12408 come with a warranty?
Absolutely. The Satco Lighting S12408 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12408?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12408 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.