You may also like
SATCO Lighting S12411 5W LED A19, Clear, Medium Base, 5000K, 90 CRI, 120V
5 Watt LED A19 - Clear - Medium Base - 5000K - 90 CRI - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.042A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Clear
- Lens Material:
- Glass
- Lumens:
- 450L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 40W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 5W
- Product Weight:
- 0.07 lb
- Product Material:
- Aluminum / Glass
Satco Lighting S12411 – Frequently Asked Questions
1) Can the Satco S12411 LED A19 go in an enclosed fixture like a jelly jar or a closed ceiling globe?
Yes. The S12411 is an enclosed rated lamp, so sealed fixtures that trap heat are fair game. It also carries a wet location rating and is listed for both indoor and outdoor use, which covers porch globes and covered exterior fixtures.
2) Is the Satco S12411 dimmable, and will it work on my existing wall dimmer?
The S12411 is a dimmable LED filament lamp on 120V, 60Hz. It draws only 0.042 amps, so a group of them on an old incandescent-style dimmer may sit below that dimmer's minimum load and flicker or buzz. For retrofits, an LED-rated dimmer is the safe pairing.
3) Is 5000K too cold for apartment units, or is this bulb better for garages and work areas?
5000K is daylight white, the coolest common residential color. It reads crisp and clinical, which suits garages, laundry rooms, stairwells, storage and shop areas. For living rooms and unit interiors where tenants expect warm light, go with a 2700K or 3000K version of the same 5W A19 instead. The color is fixed here, not field selectable.
4) Does a clear glass LED filament bulb look right in an open fixture where the bulb is visible?
That is what it is built for. The S12411 uses LED filaments behind a clear glass lens, so you see the filament strands the way you would in a vintage incandescent, rather than a frosted white dome. In a bare-bulb pendant, sconce or chandelier it looks like a filament lamp. In a fixture with an open bottom and a direct sightline, expect visible glare and sparkle off the clear glass.
5) Why spec a 90 CRI bulb over a standard LED for a hotel or retail space?
At 90 CRI, colors render close to what they look like under natural light, so paint, fabric, skin tone and merchandise do not go flat or muddy. Most commodity LED A19 lamps sit around 80. If your spec sheet calls for 90+ CRI in guest rooms, retail or healthcare, this 5W lamp meets it at 5000K.
6) Can this A19 be installed base-up in a can or sideways in a sconce?
Burning position is universal, so base-up, base-down or horizontal all work. That matters in ceiling fans, recessed cans and wall sconces where heat collects around the base. Beam spread is 320 degrees, close to omnidirectional, so it throws light back past the base as well.
7) Is the Satco S12411 a three-way bulb?
No. It is a single-output 5W lamp, so in a three-way socket it will light at one level only, or may not light on every switch position. For a three-way lamp you need a lamp specified as three-way with the matching base.
8) Does this Satco LED qualify for a DLC utility rebate on a commercial project?
No, the S12411 is not DLC approved, so it will not qualify under programs that require a DLC listing. It is FCC compliant and is lawful for sale in California.
How fast can I get the Satco Lighting S12411 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12411 come with a warranty?
Absolutely. The Satco Lighting S12411 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12411?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12411 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.