SATCO Lighting S12425 10.5W LED A19, Clear, Medium Base, 5000K, 90 CRI, 120V

Yes, it is an enclosed rated lamp, so closed globes, jelly jars, and sealed ceiling fixtures are fair game. It also carries a wet location rating and is listed for indoor and outdoor use, which covers porch fixtures and exterior sconces exposed to weather. Burning position is universal, so base up, base down, or horizontal all work.

The lamp is dimmable on 120V, 60Hz line voltage. Like any LED filament lamp, it performs best on a dimmer rated for LED loads; older incandescent-only dimmers sized for several hundred watts often have a minimum load this 10.5W lamp won't meet, which shows up as flicker or drop-out at the low end. One note for stairwell and three-way socket applications: this is not a 3-way lamp, so it will not step through levels in a 3-way socket.

5000K is daylight white, a crisp neutral-to-cool light with no yellow cast, and the 90 CRI rendering means colors, skin tones, and finishes read accurately under it. That combination suits garages, workshops, laundry rooms, exam and back-of-house areas, and retail display where color accuracy matters. If you are matching existing warm-white lamps in a lobby or apartment living space, 5000K will look noticeably bluer than 2700K or 3000K next to it.

It can. The clear glass lens leaves the LED filaments visible, which is the look you want in exposed-bulb pendants, vanity strips, and cage fixtures. In a bare socket at eye level, clear glass puts more visible sparkle and glare into the room than a frosted lamp would. The 320 degree beam spread means light goes nearly all the way around the lamp rather than throwing in one direction.

Average rated life is 15,000 hours. On a common-area fixture running roughly 12 hours a day that is about three and a half years between changes, which is the case for standardizing a property on one lamp instead of chasing mixed stock. The lamp is a single configuration, clear finish, 5000K, medium base, 10.5W, so reorders match what is already in the sockets. It is not CCT selectable, so every one of these is 5000K out of the box.

No. This 10.5W LED A19 is not DLC approved, so it will not qualify for utility programs that require a DesignLights Consortium listing. It is FCC compliant and marked lawful for sale in California, which covers the usual procurement checks on general purpose lamps.

The lamp uses a glass lens with an aluminum and glass base construction. Glass holds up to UV and outdoor heat better than a polycarbonate diffuser, which is consistent with its wet location rating, but it is breakable, so it is not the choice for gym ceilings, high-traffic stairwells, or anywhere a shatter-resistant coated lamp is specified.