You may also like
SATCO Lighting S12423 10.5W LED A19, Clear, Medium Base, 3000K, 90 CRI, 120V
10.5 Watt LED A19 - Clear - Medium Base - 3000K - 90 CRI - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.088A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Clear
- Lens Material:
- Glass
- Lumens:
- 1100L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 10.5W
- Product Material:
- Aluminum / Glass
- Product Weight:
- 0.08 lb
- Department:
- Electrical
Satco Lighting S12423 – Frequently Asked Questions
1) Is the Satco S12423 A19 safe to use in a fully enclosed fixture?
Yes. It is an enclosed rated lamp, so sealed ceiling fixtures, jelly jars, and closed globes are fine. It also carries a wet location rating and is listed for both indoor and outdoor use, which covers porch fixtures and exterior sconces that take weather directly.
2) Will a 90 CRI 3000K bulb match the other LED bulbs already in my building?
Only if those are also 3000K. The S12423 is fixed at 3000K warm white with a 90 CRI, and it is not a CCT-selectable lamp, so there is no field switch to bring it to 2700K or 4000K. On a property standardization, 3000K reads slightly crisper than 2700K and will look noticeably different side by side in the same room.
3) Will this Satco clear LED A19 dim without flicker on my existing dimmers?
The S12423 is a dimmable lamp on 120V, 60Hz. It draws only 0.088 amps, so on an older magnetic or high-wattage incandescent dimmer you may fall below the dimmer's minimum load if you only run one or two lamps on the circuit. Ganging several lamps on the same dimmer, or using a LED-rated dimmer, is the usual fix.
4) Can I use the Satco S12423 in a three-way lamp socket?
No. The S12423 is not a three-way lamp. Screwed into a three-way socket it will light at a single output level rather than stepping through the settings, so for a three-way table lamp you need a bulb specifically built as three-way.
5) What does the clear glass on this Satco filament A19 look like when it's lit?
It's an LED filament lamp behind clear glass, so you see the filament strands rather than a frosted diffuser, the same look as a vintage-style clear incandescent. Expect visible sparkle and defined shadows, which suits exposed fixtures, chandeliers, and open-globe pendants. If you want an even, glare-free wash, choose a frosted A19 instead.
6) Can I mount this Satco A19 base-up in a recessed can or pointing sideways?
Yes, burning position is universal, so base-up, base-down, or horizontal all work. The beam spread is 320 degrees, so it throws light nearly all the way around the lamp rather than just forward, which is what you want in a table lamp or an open fixture but means some light goes back into the can in a recessed downlight.
7) How long does the Satco S12423 LED A19 last before relamping?
Rated at 15,000 average hours. For a common-area fixture running about 12 hours a day, that's roughly three and a half years between relamps, which is the number that matters when you're scheduling maintenance across a portfolio rather than changing one bulb.
8) Is the Satco S12423 DLC listed for a utility rebate?
No, the S12423 is not DLC approved, so it won't qualify under a program that requires a DLC listing. It is FCC compliant, and Satco states it is lawful for sale in California.
9) Is this Satco A19 bulb glass or plastic?
Glass. The lens is clear glass and the lamp is built with aluminum and glass construction, not a polycarbonate shell. Handle and pack it like a glass lamp on a jobsite.
How fast can I get the Satco Lighting S12423 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12423 come with a warranty?
Absolutely. The Satco Lighting S12423 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12423?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12423 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.