SATCO Lighting S12415 8W LED A19, Clear, Medium Base, 3000K, 90 CRI, 120V
8 Watt LED A19 - Clear - Medium Base - 3000K - 90 CRI - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.067A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Clear
- Lens Material:
- Glass
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 8W
Satco Lighting S12415 – Frequently Asked Questions
1) Will the Satco S12415 LED A19 work in an enclosed ceiling fixture or a jelly jar?
Yes. The S12415 is an enclosed rated lamp, so it can go in a closed globe, jelly jar, or sealed ceiling fixture without voiding the lamp. It's also rated for wet locations, which covers covered porches, shower cans, and exterior fixtures that take direct moisture. That combination is the reason to reach for this one over a standard A19 that's dry location only.
2) Is the Satco S12415 8W LED A19 dimmable?
Yes, the S12415 dims. It's a 120V, 60Hz lamp, so it needs a dimmer rated for LED loads rather than an old incandescent rheostat style dimmer. It is not a three-way lamp, so don't put it in a three-way socket expecting three levels, and it isn't color selectable either, it's fixed at 3000K.
3) What does 3000K at 90 CRI actually look like compared to a soft white bulb?
3000K is warm white, a step brighter and cleaner than the 2700K soft white most homes run, closer to a warm halogen. The 90 CRI is the part that matters for finish work: colors, wood tones, paint, and skin read accurately instead of washing out the way they do under a typical 80 CRI LED. For hospitality lobbies, model units, retail, and healthcare spaces where the finishes were chosen carefully, that's the spec to hold.
4) Will a clear filament LED bulb look right in an open fixture where the bulb is visible?
That's what this one is built for. The S12415 uses LED filaments behind a clear glass lens, so it reads as a lit filament rather than a frosted white blob. In exposed sockets, sconces, pendants, chandeliers, and vintage style fixtures that's the look you want. In a bare socket over a work area it will produce visible glare and sharp shadows, so use a frosted lamp there instead.
5) Can the Satco S12415 be mounted base up, base down, or sideways?
Any orientation. Burning position is universal, so base up in a recessed can, base down in a pendant, or horizontal in a sconce all work with no derating. With a 320 degree beam spread it throws light nearly all the way around the lamp, so it fills a shade or globe evenly regardless of how the socket is oriented.
6) Is the Satco S12415 LED bulb legal to sell and install in California?
Yes, the S12415 is lawful for sale in California. It's also FCC compliant, which matters where lamps sit near radios, AV gear, or metering equipment and cheap drivers cause interference.
7) Does the Satco S12415 qualify for a utility rebate through DLC?
No. The S12415 is not DLC listed, so it won't qualify under a DesignLights Consortium based utility incentive program. If a rebate is driving the purchase on a commercial retrofit, check the program's requirements before you spec this lamp.
8) What is the Satco S12415 bulb made of, and will it handle a high traffic area?
Aluminum and glass, with a glass lens. That's a rigid glass envelope, not plastic, so it holds up to heat and cleaning but it will break if it's struck. In gyms, warehouse aisles, or anywhere a ladder or ball can reach the fixture, put it behind a lens or guard, or pick a shatter resistant coated lamp instead.
How fast can I get the Satco Lighting S12415 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12415 come with a warranty?
Absolutely. The Satco Lighting S12415 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12415?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12415 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.