You may also like
SATCO Lighting S12429 12.5W LED A19, Clear, Medium Base, 2700K, 90 CRI, 120V
12.5 Watt LED A19 - Clear - Medium Base - 2700K - 90 CRI - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Clear
- Lens Material:
- Glass
- Lumens:
- 1500L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 100W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Material:
- Aluminum / Glass
- Product Weight:
- 0.09 lb
Satco Lighting S12429 – Frequently Asked Questions
1) Can this Satco clear LED A19 be used in an outdoor fixture or an enclosed porch light?
It is rated for both indoor and outdoor use, with a wet location rating, so open porch fixtures, covered entries and exterior lanterns are all fair game. Burning position is universal, so it can be mounted base up, base down or horizontal without affecting performance.
2) Is the Satco S12429 A19 dimmable on existing wall dimmers?
The S12429 is a dimmable LED A19 running on 120V, 60Hz, drawing 0.104A. Because the draw per lamp is so low, a dimmer loaded with only one or two of these may not reach its minimum load, which is the usual cause of flicker or a dead bottom end on LED retrofits. It is not a three-way lamp, so it will only operate at full output in a three-way socket.
3) Why choose a clear LED filament A19 instead of a frosted one?
The S12429 has a clear glass lens over an LED filament, so the filament itself is visible. That is what you want in exposed-bulb fixtures, chandeliers, sconces and pendants where the lamp is part of the look. In a bare socket where people look straight at it, a frosted or milky A19 is the easier choice, because clear glass puts visible glare at eye level. The 320 degree beam spread means light goes nearly all the way around, not just forward.
4) Will a 90 CRI bulb make a noticeable difference in a hotel room or retail space?
Yes, and it is the reason to spec this one. At 90 CRI the S12429 renders skin tones, wood and fabric far more accurately than the 80 CRI lamps that fill most general-purpose stock. For hospitality guest rooms, dining areas and retail display, 90 CRI at 2700K is the combination that reads as warm incandescent light rather than flat LED.
5) How long will these Satco LED A19 lamps last before maintenance has to relamp?
Average rated life is 15,000 hours. On a common-area fixture burning roughly 12 hours a day that works out to about 3.4 years between relamps. For portfolio standardization, note the color is fixed at 2700K, not CCT selectable, so every unit you buy under S12429 matches the rest.
6) Does this Satco bulb qualify for a utility rebate through DesignLights Consortium?
No. The S12429 is not DLC approved, so it will not qualify under programs that require a DLC listing. It is FCC compliant and is noted as lawful for sale in California.
7) Is the Satco S12429 glass or plastic, and how much does one bulb weigh?
Construction is aluminum and glass, with a glass lens over the LED filament. Each lamp weighs 0.09 lb. Glass means it will break if dropped, which matters if you are stocking a cart for a high-rise relamp or shipping to a remote site.
8) What exact part number do I order for the Satco 12.5W clear LED A19 at 2700K?
Order Satco S12429. It is a single configuration, clear finish only, 12.5W A19 with a medium base, 2700K, 90 CRI, 1500 lumens on 120V. There are no finish or color temperature options to specify.
How fast can I get the Satco Lighting S12429 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12429 come with a warranty?
Absolutely. The Satco Lighting S12429 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12429?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12429 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.