SATCO Lighting S21209 5.5W G16.5 LED, Clear, Candelabra Base, 90 CRI, 2700K, 120V
5.5 Watt G16.5 LED - Clear - Candelabra base - 90 CRI - 2700K - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.046A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- G16.5
- Lumens:
- 500L
- Operating Frequency:
- 60Hz
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 5.5W
Satco Lighting S21209 – Frequently Asked Questions
1) Can the Satco S21209 LED candelabra bulb be used in an enclosed fixture?
Yes. The S21209 is an enclosed rated lamp, so it can go in a closed globe, lantern, or sealed ceiling fixture without voiding its rating. It is also wet location rated and listed for both indoor and outdoor use, which covers covered porches, exterior sconces, and post lanterns.
2) Will a clear G16.5 LED filament bulb look right in an open chandelier where the bulb is visible?
That is what it is built for. The S21209 uses LED filament construction behind clear glass, so you see the filament the way you would in a decorative incandescent, and the G16.5 globe shape is the small round bulb used in chandeliers, vanity bars, and pendant fixtures. The 300 degree beam spread means it throws light nearly all the way around rather than one direction.
3) Does this Satco bulb render color well enough for hospitality or retail spaces?
At 90 CRI it is in the high color rendering range, which is what hospitality, retail display, and residential common areas typically specify. Paired with the 2700K warm color temperature, it reads like a traditional incandescent rather than the cooler, flatter light of a builder-grade LED.
4) Is the Satco S21209 acceptable for a California Title 24 job?
Yes, the S21209 is Title 24 compliant, so it can be used where California energy code requires compliant lamps. It is also FCC compliant. It is not DLC listed, so if a utility rebate program on your job requires DLC qualification, this lamp will not satisfy that line item.
5) Can this candelabra LED be installed base-up in a ceiling fixture?
Burning position is universal, so base-up, base-down, or horizontal all work. That matters on chandeliers and wall sconces where some lamps point up and others down on the same fixture. Rated life is 15,000 hours regardless of orientation.
6) How many of these 5.5W Satco candelabra lamps can I put on one circuit?
Each lamp draws 0.046 amps at 120 volts, 60 Hz. That is a small enough load that lamp count is rarely the limiting factor on a lighting circuit; the fixture and dimmer ratings usually decide before the breaker does. Use the 0.046A figure per lamp when you total a chandelier or a corridor run.
7) Does the Satco S21209 work as a three-way bulb or offer selectable color temperature?
No on both counts. It is a fixed 2700K lamp with no CCT selection switch, and it is not a three-way bulb, so in a three-way socket it will run at a single output level only. If you need multiple light levels, put it on a dimmer instead.
8) What is the Satco S21209 made of, and will the base corrode in an outdoor fixture?
The lamp is glass with a nickel plated aluminum base. Nickel plating is the standard base finish for damp and wet location service, and the lamp carries a wet location rating for outdoor fixtures.
How fast can I get the Satco Lighting S21209 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21209 come with a warranty?
Absolutely. The Satco Lighting S21209 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21209?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21209 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.