You may also like
SATCO Lighting S21211 5.5W G16.5 LED, Clear, Candelabra Base, 90 CRI, 4000K, 120V
5.5 Watt G16.5 LED - Clear - Candelabra base - 90 CRI - 4000K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.046A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- G16.5
- Lumens:
- 500L
- Operating Frequency:
- 60Hz
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 5.5W
- Product Weight:
- 0.037 lb
- Product Material:
- Glass / Nickel Plated Aluminum
Satco Lighting S21211 – Frequently Asked Questions
1) Can I put this Satco G16.5 LED filament bulb in an enclosed outdoor fixture?
Yes on both counts. The S21211 is an enclosed rated lamp and carries a Wet location rating, so sealed porch lanterns, post lights and covered exterior sconces are all fair game, indoor or outdoor. Burning position is universal, so base up, base down or horizontal all work.
2) How bright is the 5.5W Satco candelabra LED compared to the 60W bulbs I'm pulling out?
500 lumens from 5.5 watts, rated as a 60W incandescent replacement. Light output is spread over a 300 degree beam angle, so it throws in nearly every direction the way a filament bulb does rather than pushing light forward like a reflector lamp.
3) Will a 4000K bulb match the warm candelabra lamps already in my building?
No. The S21211 is 4000K, a neutral white, and it will read noticeably cooler and whiter next to the 2700K warm lamps typically used in residential chandeliers and sconces. Color temperature is fixed, not selectable. If you are standardizing a fixture or a whole floor, relamp the full run at 4000K rather than mixing, or spec a warmer Satco lamp instead.
4) Is the Satco S21211 dimmable, and will it work on my existing wall dimmer?
The S21211 is a dimmable 120V LED. Note that it is not a three-way lamp, so it will not step through levels on a three-way socket. For smooth low-end performance, an LED-rated dimmer is the right pairing with any 5.5W lamp.
5) Does the Satco S21211 meet California Title 24 for a residential lighting job?
Yes, it is Title 24 compliant, and it is also FCC compliant. It is not a DLC listed product, so if your rebate program requires DLC qualification this lamp will not satisfy it.
6) Is 90 CRI worth specifying for hotel and lobby candelabra fixtures?
The S21211 renders at 90 CRI, which is the threshold most hospitality, healthcare and retail specs call for because skin tones, finishes and fabrics hold their color. Standard LED lamps commonly sit at 80 CRI, so this is the one to use where a designer or a spec sheet names high color rendering.
7) Is the clear glass on this Satco LED bulb going to look right in an exposed chandelier?
It is built as a clear glass LED filament lamp, so the visible strands mimic the look of an antique filament bulb in open candelabra fixtures. Construction is glass with a nickel plated aluminum base, and the lamp weighs 0.037 lb.
8) How long does this Satco candelabra LED last before I have to relamp?
Rated life is 15,000 hours. On a fixture burning roughly 12 hours a day, that is about three and a half years between relamps, which is the number property managers use to schedule lift time on high chandeliers and exterior lanterns.
How fast can I get the Satco Lighting S21211 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21211 come with a warranty?
Absolutely. The Satco Lighting S21211 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21211?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21211 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.