You may also like
SATCO Lighting S21222 5.5W G16.5 LED, Clear, Medium Base, 90 CRI, 4000K, 120V
5.5 Watt G16.5 LED - Clear - Medium base - 90 CRI - 4000K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.046A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- G16.5
- Lumens:
- 500L
- Operating Frequency:
- 60Hz
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 5.5W
Satco Lighting S21222 – Frequently Asked Questions
1) Can the Satco S21222 G16.5 LED bulb go in an enclosed fixture?
Yes. The S21222 is an enclosed rated lamp, so sealed globes, jelly jars, and closed ceiling fixtures are fine. It also carries a Wet location rating and is listed for indoor or outdoor use, which covers covered porches, vanity globes over showers, and exterior sconces.
2) Will a 5.5W LED G16.5 globe be bright enough to replace a 60 watt incandescent?
Yes. The S21222 draws 5.5 watts and puts out 500 lumens, which Satco rates as a 60W incandescent equivalent. Current draw is 0.046A on 120V, 60Hz, so a circuit loaded with old 60W globes drops to a fraction of its former load when you relamp.
3) Is the Satco S21222 dimmable, and does it work on a three-way socket?
Dimmable, yes. Three-way, no. It is a single-output lamp with no 3-way circuitry, so in a 3-way socket it will only light at the full step. For dimming, pair it with an LED-compatible dimmer.
4) What does 4000K at 90 CRI look like in a vanity or hospitality fixture?
4000K is a neutral white, cooler and crisper than the warm yellow of an incandescent and not as blue as a 5000K daylight lamp. The 90 CRI rating means color rendering is high, so skin tones, finishes, and merchandise read accurately. That combination suits bathrooms, kitchens, lobbies, and retail displays where color accuracy matters. If you are relamping alongside existing 2700K bulbs, they will not match.
5) This is an exposed-bulb fixture. Will the filament look right?
It is an LED filament lamp in a clear G16.5 glass globe, so the filament strands are visible the way a decorative incandescent globe is. Base material is glass with a nickel plated aluminum base. It is built for open fixtures where the bulb is part of the look.
6) Can I mount the Satco S21222 base-up in a can or sideways in a sconce?
Any orientation. Burning position is universal, so base-up, base-down, or horizontal are all acceptable. Its 300 degree beam spread throws light nearly all the way around, which is why it works in bare-bulb sconces and multi-light vanity bars rather than as a directional lamp.
7) Does this Satco LED globe meet California Title 24?
Yes, the S21222 is Title 24 compliant and FCC compliant. Note it is not DLC listed, so if your rebate program requires a DesignLights Consortium listing, this lamp will not qualify for it.
8) How long before I have to relamp these across a building?
Rated average life is 15,000 hours. At roughly 12 hours a day in a corridor or lobby that is a bit over three years of service, which is the figure to plan a relamp cycle around when you are standardizing a property on one bulb.
9) Is the color temperature on the S21222 adjustable?
No. It is fixed at 4000K with no selectable CCT switch. If you need to set warm white or daylight at install, you need a different lamp; ordering this one commits the fixture to neutral white.
How fast can I get the Satco Lighting S21222 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21222 come with a warranty?
Absolutely. The Satco Lighting S21222 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21222?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21222 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.