SATCO Lighting S21206 4W G16.5...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.43

SATCO Lighting S21206 4W G16.5 LED, Clear, Candelabra Base, 90 CRI, 4000K, 120V

(No reviews yet) Write a Review

Model: S21206
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S21206 4W G16.5 LED, Clear, Candelabra Base, 90 CRI, 4000K, 120V

4 Watt G16.5 LED - Clear - Candelabra base - 90 CRI - 4000K - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.033A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED Filament
Lamp Shape:
G16.5
Lumens:
350L
Operating Frequency:
60Hz
Product Type:
Globe
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Candelabra
Base Material:
Glass / Nickel Plated Aluminum
Incandescent Equivalent:
40W
Location Rating:
Wet
CRI:
90
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor/Outdoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
300
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
4W
Product Weight:
0.04 lb
Product Material:
Glass / Nickel Plated Aluminum
Department:
Electrical

Satco Lighting S21206 – Frequently Asked Questions

1) What incandescent bulb does the Satco 4W G16.5 LED replace, and how bright is it?
It replaces a 40 watt incandescent globe while drawing 4 watts, and puts out 350 lumens. Light output spreads over a 300 degree beam angle, so it fills a fixture the way a clear globe bulb does rather than throwing a directional beam.
2) Can I use this Satco candelabra LED in an outdoor fixture or an enclosed ceiling fixture?
Both are fine. The S21206 carries a wet location rating and is listed for indoor or outdoor use, so covered porch lanterns and exterior sconces are in scope. It is also an enclosed rated lamp, which means it can go inside a sealed or gasketed fixture where non-rated LEDs overheat and fail early. Burning position is universal, so base up, base down or horizontal all work.
3) Is 4000K too cool for a chandelier, or should I pick a warmer candelabra bulb?
4000K is a neutral white, noticeably crisper than the 2700K warm glow most people expect from a decorative chandelier. It suits lobbies, corridors, retail and task areas where you want a clean white light. For hospitality or residential spaces trying to match existing incandescent warmth, pick a warmer color temperature instead, because this lamp has a fixed 4000K output and is not CCT selectable. Color rendering is 90 CRI, so skin tones and finishes read accurately either way.
4) Is the Satco S21206 dimmable, and will it work on my existing dimmer?
The lamp is dimmable. At 4 watts per bulb it draws very little, so on a legacy incandescent (leading edge) dimmer a small fixture count can fall under the dimmer's minimum load and flicker or buzz. An LED-rated dimmer, or enough lamps on the circuit, avoids that. It is not a three-way lamp, so do not put it in a three-way socket expecting stepped output.
5) Does the clear glass on this Satco LED filament bulb mean you see the filament?
Yes. It is an LED filament lamp in clear glass, so the filament strands are visible the way they are in a decorative incandescent. That matters in open chandeliers, exposed-bulb pendants and glass front fixtures where the lamp itself is part of the look. Construction is glass with a nickel plated aluminum base.
6) Does the Satco S21206 meet California Title 24 for a lighting retrofit?
Title 24 compliant, yes, and it is FCC compliant as well. Useful if you are relamping a California property under code. It is not DLC listed, so if a utility rebate program requires a DLC qualified product, this lamp will not qualify for it.
7) How long do these 4W candelabra LEDs last before maintenance has to relamp again?
Average rated life is 15,000 hours. On a corridor or exterior fixture running roughly 12 hours a day that is about three and a half years between relamps, which is the number to use when you are planning a building-wide candelabra changeout.
How fast can I get the Satco Lighting S21206 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21206 come with a warranty?
Absolutely. The Satco Lighting S21206 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21206?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21206 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.