SATCO Lighting S21201 3W G16.5...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.36

SATCO Lighting S21201 3W G16.5 LED, Clear, Candelabra Base, 90 CRI, 4000K, 120V

(No reviews yet) Write a Review

Model: S21201
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.36
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S21201 3W G16.5 LED, Clear, Candelabra Base, 90 CRI, 4000K, 120V

3 Watt G16.5 LED - Clear - Candelabra base - 90 CRI - 4000K - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.025A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED Filament
Lamp Shape:
G16.5
Lumens:
200L
Operating Frequency:
60Hz
Product Type:
Globe
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Candelabra
Base Material:
Glass / Nickel Plated Aluminum
Incandescent Equivalent:
25W
Location Rating:
Wet
CRI:
90
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor/Outdoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
300
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
3W

Satco Lighting S21201 – Frequently Asked Questions

1) Can I use this 3W Satco LED in an enclosed or outdoor fixture?
Both are covered. The S21201 is an enclosed rated lamp, so it can go inside a sealed or closed globe fixture where a non-rated LED would overheat, and it carries a wet location rating for indoor or outdoor use. That makes it usable in covered porch lanterns, post lights and exterior sconces as well as interior chandeliers.
2) What incandescent bulb does this 3 watt LED replace?
It replaces a 25W incandescent candelabra bulb, putting out 200 lumens on 3 watts. If you are relamping a fixture that originally took 40W or 60W candelabra lamps, this one will read noticeably dimmer, so match it to 25W sockets or accept the lower output across the whole fixture.
3) Will this bulb match the other candelabra LEDs already installed in my building?
Only if those lamps are also 4000K. This one is fixed at 4000K with no selectable color temperature, so it will read cooler and whiter next to the 2700K or 3000K candelabra lamps commonly used in lobbies and units. For a fleet relamp, standardize the whole space on 4000K or pick a warmer lamp instead.
4) Is the Satco S21201 dimmable, and is it a three-way bulb?
It is dimmable on a standard 120V dimmer, but it is not a three-way lamp. If the fixture uses a three-way socket and switch, this bulb will run at full output only. For dimming, use an LED-compatible dimmer and keep all lamps on the circuit the same type to avoid flicker at the low end.
5) What does the light from this bulb actually look like in a chandelier?
It is a clear glass LED filament lamp, so you see the filament through the glass the way you would with a decorative incandescent. Color is 4000K, a neutral to cool white rather than the warm amber most decorative candelabra lamps produce, and the 90 CRI rating means colors render accurately. The 300 degree beam spread throws light nearly all the way around the lamp, so it works base-up or base-down in any burning position.
6) Is the Satco S21201 acceptable for a California Title 24 job?
Yes, it is listed as Title 24 compliant, which matters on California residential lighting permits. It is also FCC compliant. It is not a DLC listed product, so if your utility rebate program requires DLC qualification, this lamp will not qualify for it.
7) How long does this Satco candelabra LED last compared with the incandescent it replaces?
Rated for 15,000 average hours. On a common area fixture burning roughly 12 hours a day that is several years between relamps, against the few thousand hours a 25W incandescent candelabra typically gives. For a property manager with dozens of chandelier sockets, that is the number that drives the labor savings.
8) What is the bulb made of, and will the base corrode in an outdoor fixture?
Construction is glass with a nickel plated aluminum base. Nickel plating on the screw shell resists corrosion better than a bare brass or plain aluminum shell, which is what lets it carry a wet location rating for exterior use.
How fast can I get the Satco Lighting S21201 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21201 come with a warranty?
Absolutely. The Satco Lighting S21201 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21201?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21201 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.