SATCO Lighting S21242 4.5W G25 LED, Clear, Medium Base, 90 CRI, 2700K, 120V, 2 Pack

Yes on both counts. The S21242 is an enclosed rated lamp, so it can go in a sealed globe or covered fixture without voiding the rating, and it carries a Wet location rating for indoor or outdoor use. That covers a bathroom vanity with a glass shade as well as an exterior porch or entry fixture exposed to rain.

Yes, the S21242 is a dimmable lamp. It is not a three-way bulb, so it will not step through low/medium/high in a three-way socket. For a property with existing dimmers, use an LED-rated dimmer; the lamp draws only 0.038A on 120V at 60Hz, and older incandescent dimmers with high minimum loads may not hold a stable low end on a two-lamp pack.

The 90 CRI rating means colors render close to natural, which matters in bathrooms, retail display, hospitality guest rooms, and anywhere people check skin tone or merchandise color. The clear glass with an LED filament also keeps the visible-filament look for exposed-bulb fixtures. If the fixture has no shade and glare is a concern, a frosted or milky globe diffuses better; the tradeoff is losing the filament appearance.

Burning position is universal, so the S21242 can be installed base-up, base-down, or horizontal. That covers pendant globes, base-up flush mounts, and sideways vanity bars with no derating.

Yes, it is listed as Title 24 compliant, which matters for new residential construction and permitted remodels in California. It is also FCC compliant. It is not DLC listed, so it will not qualify for utility rebate programs that require DesignLights Consortium listing.

Beam spread is 300 degrees, which is near-omnidirectional. Light goes out sideways and back toward the base as well as forward, so it fills a globe shade or an open vanity fixture evenly rather than throwing a spot. If you need directed light onto a task surface, a reflector lamp like a BR or PAR is the better choice.

Average rated life is 15,000 hours, and the S21242 ships two lamps per pack. For a multi-family or hospitality relamp, that works out to roughly a full pack per two-socket vanity fixture.

Fixed. The S21242 is 2700K only, with no CCT selection switch. If you are standardizing a building and some fixtures need 3000K or 4000K, you will need to order those as separate lamps rather than field-setting this one.

Construction is glass with a nickel plated aluminum base. Nickel plating resists corrosion better than bare brass or zinc in damp sockets, which lines up with the lamp's Wet location rating for covered exterior fixtures.