SATCO Lighting S21244 4.5W G25 LED, White, Medium Base, 90 CRI, 2700K, 120V, 2 Pack
4.5 Watt G25 LED - White - Medium base - 90 CRI - 2700K - 120 Volt - 2 Pack
Manufacturer Resources
Product Specs
- Amps:
- 0.038A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- G25
- Lumens:
- 350L
- Operating Frequency:
- 60Hz
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 40W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
Satco Lighting S21244 – Frequently Asked Questions
1) Will the Satco S21244 G25 LED work in an enclosed bathroom vanity fixture or a covered outdoor porch light?
Both are fine. The S21244 is an enclosed rated lamp, so trapped heat inside a glass globe or jelly jar will not void its use, and it carries a Wet location rating for indoor or outdoor service. Burning position is universal, so it can be installed base up, base down, or horizontal.
2) Can this 4.5W G25 LED globe be dimmed on an existing wall dimmer?
It is a dimmable lamp on 120V, 60Hz. One thing to plan for: at 0.038 amps per lamp, a small bank of these may fall below the minimum load many older incandescent dimmers need to run smoothly, so an LED-rated dimmer is the safer pairing on a vanity or bath bar.
3) Is 2700K with 90 CRI warm enough to match the incandescent globes already in my units?
2700K is the soft warm white that reads the same as a standard incandescent, and the 90 CRI rendering keeps skin tones and paint colors accurate at a bath mirror. For a property manager phasing bulbs in over time, this is the color point that blends with remaining incandescent G25s rather than looking blue beside them.
4) Does this Satco G25 LED throw light all the way around, or does it have a dark spot like some LED bulbs?
Beam spread is 320 degrees, so it lights nearly the full sphere. That makes it usable in open-globe vanity bars and exposed-socket fixtures where the bulb is visible from the side and below. It uses an LED filament construction with a white finish.
5) Does the Satco S21244 count toward California Title 24 lighting requirements?
Yes, the lamp is Title 24 compliant, which matters on California residential and multi-family work where installed lighting has to meet state efficiency rules. It is also FCC compliant. It is not a DLC listed product, so do not plan on it for DLC-based commercial rebates.
6) Will this G25 LED work in a three-way lamp socket?
No. The S21244 is not a three-way lamp, so in a three-way socket it will light at one level only (or not at all on the low tap, depending on the socket). For three-way table lamps you need a bulb specifically built with the three-way contact.
7) How many bulbs come in a Satco S21244 order, and how long are they rated to last?
S21244 ships as a 2 pack, and each lamp is rated for 15,000 average hours. For MRO stocking, that works out to roughly a decade of service at 4 hours a day, which is the usual reason facilities standardize on it instead of relamping incandescents every season.
8) Is the color temperature on this Satco LED globe adjustable between warm and cool?
No, it is fixed at 2700K. CCT selectable is listed as No, so there is no switch on the base. If a job needs one SKU to cover both 2700K and 3000K openings, this is not that lamp.
9) What is the base and body made of on the Satco S21244?
Glass with a nickel plated aluminum base. The nickel plating resists corrosion at the socket contact, which is worth knowing given the wet location rating on exterior and bath applications.
How fast can I get the Satco Lighting S21244 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21244 come with a warranty?
Absolutely. The Satco Lighting S21244 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21244?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21244 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.