SATCO Lighting S21254 6W G40 LED, Clear, Medium Base, 90 CRI, 4000K, 120V

Yes. The S21254 G40 filament lamp carries a Wet location rating and is listed for indoor or outdoor use, so exposed patio and canopy fixtures are fair game. It also runs on 120V at 60Hz, which is standard line voltage for those applications.

Yes, the S21254 is an enclosed rated lamp, so sealed jars, globes and vapor-tight fixtures that would shorten the life of a non-rated LED are acceptable. Burning position is universal, so base up, base down or horizontal all work.

The lamp is dimmable, drawing 0.050A at 120V. Because the load is that small, a legacy incandescent-style dimmer may not hold a stable low end on a single bulb; LED-rated dimmers or several lamps on the same circuit perform better. Note the lamp is not three-way, so it will not step through a three-way socket.

4000K is neutral white, cleaner and crisper than the 2700K warm glow most hospitality string and vanity applications use. With a 90 CRI rating the color rendering is high enough for retail, kitchen, and salon work where finishes and skin tones need to read accurately. If you want the warm vintage look from a clear filament globe, 4000K is the wrong choice.

Beam spread is 300 degrees, which is near omnidirectional. That makes it suited to open globe pendants, bath bars and exposed string runs where light needs to come off the whole lamp rather than be thrown one direction. For a directional downlight you want a reflector lamp instead.

Yes, the S21254 is Title 24 compliant and FCC compliant. It is not DLC listed, so if your utility rebate program requires a DLC qualified product, this lamp will not qualify for it.

No. The S21254 is fixed at 4000K and is not CCT selectable, so it cannot be field-adjusted to 2700K or 3000K to match adjacent fixtures. If you are standardizing across openings with mixed color temperatures, order the lamp in the specific Kelvin each area needs.

Clear, so the LED filament is visible through the glass. The lamp is built from glass with a nickel plated aluminum base. Because the filament shows, this is intended for decorative fixtures where the bulb is part of the look; if glare is a concern in a low open fixture, a frosted globe is the better pick.

Rated average life is 15,000 hours. For a property manager running decorative globes 12 hours a day, that works out to roughly three and a half years per lamp before the scheduled relamp. Each bulb weighs 0.209 lb, which matters when you are ordering cases for a large relamp.