You may also like
SATCO Lighting S21253 6W G40 LED, Clear, Medium Base, 90 CRI, 3000K, 120V
6 Watt G40 LED - Clear - Medium base - 90 CRI - 3000K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.050A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- G40
- Lumens:
- 500L
- Operating Frequency:
- 60Hz
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 6W
- Product Material:
- Glass / Nickel Plated Aluminum
- Product Weight:
- 0.21 lb
- Department:
- Electrical
Satco Lighting S21253 – Frequently Asked Questions
1) Can the Satco S21253 G40 LED bulb be used in an outdoor string light or wet location fixture?
Yes. The S21253 G40 filament lamp carries a Wet location rating and is listed for indoor or outdoor use, so exterior string lights, covered patios, and open porch fixtures are all in scope. It runs on standard 120V, 60Hz line power.
2) Will this G40 LED globe work in a fully enclosed fixture?
It will. Satco lists the S21253 as an Enclosed Rated Lamp, so sealed jelly jars, closed globes, and gasketed exterior fixtures are fine. It also carries a Universal burning position, meaning base up, base down, or horizontal all work without affecting rated life.
3) Is this Satco G40 LED dimmable, and will it work on my existing dimmer?
The S21253 is a dimmable lamp. It draws only 0.050A at 120V, which is a very low load, so on an older magnetic or incandescent-style dimmer you may need several lamps on the circuit to reach the dimmer's minimum load. A modern LED-rated dimmer avoids that. It is not a three-way lamp.
4) Will a 3000K 90 CRI bulb match the warm white bulbs already in my building's vanity and fixture globes?
At 3000K it is a warm white, the common match for hospitality and residential fixtures running soft white lamps. The 90 CRI rating means color rendering is high, so skin tones and finishes read accurately at a bathroom vanity or in a lobby fixture. The color temperature is fixed, not selectable, so every lamp out of the box is the same 3000K.
5) Does the Satco S21253 throw light in all directions, or is it directional?
It's effectively omnidirectional, with a 300 degree beam spread. That suits open globe fixtures, bare-socket string lights, and chandeliers where the lamp is seen from every side. For downlight-only applications a reflector lamp would be the better choice.
6) Does this Satco LED globe meet California Title 24 requirements?
Yes, the S21253 is listed as Title 24 compliant, which matters for California multi-family and commercial relamping where the fixture or space falls under the energy code. It is also FCC compliant. It is not a DLC approved product, so it will not qualify for rebate programs that require DLC listing.
7) How long does this 6W G40 LED last compared to the incandescent globes I keep relamping?
Rated at 15,000 average hours. On a hospitality or common-area fixture running roughly 12 hours a day, that is several years between lamp changes, against the 1,000 to 2,000 hours typical of the incandescent G40 globes it replaces. That relamping labor is usually the real cost in a multi-fixture install.
8) What is the Satco S21253 globe made of, and is the glass clear or frosted?
Clear glass with a nickel plated aluminum base. The clear envelope leaves the LED filaments visible, which is the point in exposed-socket pendants and string lighting. If you want a diffused, glare-free globe, a frosted or white G40 is the lamp to specify instead. Each bulb weighs 0.21 lb.
How fast can I get the Satco Lighting S21253 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21253 come with a warranty?
Absolutely. The Satco Lighting S21253 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21253?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21253 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.