SATCO Lighting S21235 6W G25 LED, Clear, Medium Base, 90 CRI, 3000K, 120V

Yes on both counts. The S21235 is an enclosed rated lamp, so it can be installed in a sealed or fully enclosed fixture without voiding its rating, and it carries a Wet location rating for indoor or outdoor use. That covers covered porch lanterns, exterior sconces, and bathroom vanity globes with a glass housing. Burning position is universal, so base up, base down, or horizontal all work.

The S21235 is dimmable on 120V, 60Hz line voltage. It is not a three-way lamp, so it will not step through low-medium-high in a three-way socket, and the color temperature is fixed at 3000K with no CCT selection switch.

Clear is the choice when the bulb is visible, which is most of what a G25 globe gets used for: exposed vanity bars, bath mirror strips, open-cage pendants, and bare-socket lanterns. The S21235 uses an LED filament behind clear glass, so you see the filament itself rather than a diffused glow, and the 300 degree beam spread throws light nearly all the way around. If the fixture puts the bulb at eye level and glare is a complaint, a frosted or satin G25 is the better pick, since clear filament glass does nothing to soften the source.

It does. The S21235 is a 90 CRI lamp, meaning color rendering close to incandescent, so skin tones in a guest bath mirror and merchandise color on a retail display read true instead of washed out. At 3000K it is warm white, which is the temperature most hospitality and residential specs call for over cooler 4000K. If you are standardizing a property, note that the color is fixed, so every socket you fill with this lamp matches.

Yes, the S21235 is Title 24 compliant and FCC compliant. It is not DLC listed, so if your utility rebate program requires a DLC qualified product number, this lamp will not satisfy that paperwork.

Rated average life is 15,000 hours. On a bathroom or corridor fixture running roughly 8 hours a day that is in the range of five years between changes, which is the main reason property managers move a whole building of G25 vanity globes to LED at once rather than one socket at a time.

Glass bulb with a nickel plated aluminum base. Nickel plating is what lets it carry the Wet location rating without the base corroding in a damp bath or an exterior lantern. The lamp weighs 0.09 lb, light enough for lightweight swing-arm and cage fixtures.

One configuration: Satco part number S21235, clear finish. There is no frosted or alternate color temperature variant under that number, so the part number alone pins down 6W, G25, clear, medium base, 90 CRI, 3000K, 120V.