You may also like
SATCO Lighting S21234 6W G25 LED, Clear, Medium Base, 90 CRI, 2700K, 120V
6 Watt G25 LED - Clear - Medium base - 90 CRI - 2700K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.050A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- G25
- Lumens:
- 500L
- Operating Frequency:
- 60Hz
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 6W
- Product Material:
- Glass / Nickel Plated Aluminum
- Product Weight:
- 0.09 lb
Satco Lighting S21234 – Frequently Asked Questions
1) Can this Satco G25 LED globe be used in an outdoor porch fixture or a covered exterior light?
It is rated for wet locations and listed for indoor or outdoor use, so exterior porch and entry fixtures are within its rating. It is also enclosed rated, meaning it can be run inside a closed lantern or glass globe without violating the lamp's rating.
2) Is the Satco S21234 dimmable, and will it work on my existing wall dimmer?
The lamp is dimmable on 120V, 60Hz line voltage. It draws only 0.050A, so a legacy incandescent dimmer sized for a 60W lamp may be well above its minimum load and can flicker or drop out at the bottom of the range. For smooth dimming, use an LED-rated dimmer, and gang several lamps on one dimmer where possible to build up the load.
3) Will this clear G25 bulb work in a fixture where the bulb is visible, like an exposed vanity bar or pendant?
That is what it is built for. It is a clear glass globe with an LED filament rather than a frosted diffuser, so it gives the visible filament look of a decorative incandescent. The 300 degree beam spread throws light nearly all the way around the lamp, so it suits fixtures that are open or aimed in more than one direction. If glare into someone's eyes is a concern at a mirror, a frosted G25 is the better choice.
4) Does the Satco S21234 meet California Title 24 for residential lighting?
Yes, it is Title 24 compliant, which matters if you are specifying lamps for residential work in California. It is also FCC compliant. It is not DLC listed, so it would not qualify for utility rebate programs that require DesignLights Consortium listing.
5) Why choose a 90 CRI G25 globe over a standard LED bulb for hotel rooms or apartment bathrooms?
The 90 CRI rating is the reason. At 90 CRI with a 2700K color, skin tones and finishes read accurately at the mirror, which is why higher-CRI lamps get specified for guest baths and makeup areas. A typical 80 CRI lamp will look flatter. If you are standardizing a property, note this one is fixed at 2700K, not color selectable, so every fixture you put it in will match.
6) Can this bulb be installed base-up in a ceiling fixture or sideways in a sconce?
Burning position is universal, so base-up, base-down, and horizontal are all acceptable. Combined with the enclosed-rated construction, that covers most flush mounts, sconces, and vanity bars without worrying about orientation.
7) Will the Satco S21234 work as a three-way bulb in a lamp with a 3-way socket?
No. This G25 is not a three-way lamp, so in a 3-way socket it will only light at a single output level. For a fixture that needs three distinct levels, order a lamp specifically marked three-way.
8) How long does this Satco G25 LED last, and how does that affect relamping schedules in a multi-family building?
Average rated life is 15,000 hours. At roughly 4 hours a day in a common-area or bath fixture, that is about ten years of service, so it takes vanity globes out of the routine turn-over replacement cycle that 1,000-hour incandescents create. Current draw is 0.050A per lamp at 120V, so a bank of them barely loads a circuit.
How fast can I get the Satco Lighting S21234 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21234 come with a warranty?
Absolutely. The Satco Lighting S21234 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21234?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21234 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.