You may also like
SATCO Lighting S21260 8W G40 LED, White, Medium Base, 90 CRI, 3000K, 120V
8 Watt G40 LED - White - Medium base - 90 CRI - 3000K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.067A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- G40
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 100W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 8W
Satco Lighting S21260 – Frequently Asked Questions
1) Will the Satco S21260 G40 LED bulb work in an enclosed outdoor fixture?
Yes. The S21260 is an enclosed rated lamp with a Wet location rating, so it can go in a sealed post-top, a covered porch globe, or an outdoor sconce where heat builds up. Plenty of decorative LED filament lamps fail in enclosed housings; this one is rated for it. It also burns in any orientation, base up, base down, or horizontal.
2) Can I put the Satco S21260 G40 LED on a dimmer?
Yes, the S21260 is dimmable. One thing to check before you order a case: it is not a three-way lamp, so it will not step through low/medium/high in a three-way socket, and it is not CCT selectable, so the color stays at 3000K no matter how far you dim it. If the fixture is on a three-way turn knob rather than a wall dimmer, this is the wrong lamp.
3) What does 3000K at 90 CRI look like in a bathroom vanity or hotel guest room?
3000K is warm white, a soft warm tone rather than the yellow of 2700K or the neutral look of 4000K. The 90 CRI rating is the part that matters for a vanity or a guest room: colors, skin tones, and finishes render close to how they look under incandescent, which is why hospitality and multi-family spec sheets often call for 90+ CRI. If the other openings in your building are running 2700K lamps, this will read slightly cooler alongside them.
4) Is the Satco S21260 a clear filament bulb or a frosted one?
It is white, not clear. The S21260 is an LED filament lamp with a white glass envelope, so you get the filament construction without staring at bare diodes. That matters in a G40 globe, which is usually hung at eye level over a mirror or a bar where an exposed clear lamp glares. The white finish spreads the light across a 320 degree beam, close to omnidirectional. The lamp is built from glass with a nickel plated aluminum base.
5) Does the Satco S21260 meet California Title 24 for new residential lighting?
Yes, the S21260 is Title 24 compliant, which is what a contractor needs when a California job requires JA8 style high efficacy lamps in the finished space. It is also FCC compliant. It is not DLC listed, so if your utility rebate program requires a DLC qualified product, this lamp will not qualify for it.
6) How often will I be relamping G40 globes if I switch to the Satco S21260?
Rated life is 15,000 hours. On a vanity or corridor fixture running roughly 6 hours a day that is around 6.8 years before the lamp is expected to reach end of life, against the roughly 1,000 hours a 100W incandescent globe delivers. For a property manager with a stairwell or exterior globe on a photocell running 12 hours a night, it works out to about 3.4 years. That is the real argument for the swap on a fleet of fixtures: fewer ladder trips, not just fewer watts.
7) Can I standardize a whole building on the Satco S21260, or does it come in other color temperatures?
The S21260 is a single configuration: 8W, 3000K, 90 CRI, white finish, medium base. It is not CCT selectable, so there is no field adjustment to match a warmer or cooler lamp already in the building. If you are standardizing, that is an advantage, every socket gets the same 800 lumen 3000K output with no risk of a maintenance tech installing a mismatched color. Order the same MPN, S21260, for every fixture.
How fast can I get the Satco Lighting S21260 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21260 come with a warranty?
Absolutely. The Satco Lighting S21260 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21260?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21260 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.