SATCO Lighting S21262 3W B11 LED, Clear, Candelabra Base, 90 CRI, 2700K, 120V

Yes. The S21262 is a B11 torpedo-shape lamp on a candelabra base, which is the small screw base used in most chandeliers, sconces and decorative fixtures. It runs on 120 volt line voltage, so it drops straight into a standard residential or commercial chandelier circuit with no driver or transformer.

It is a dimmable lamp. At 3 watts it draws very little current, so on a line-voltage dimmer controlling only a few of these you can run into the dimmer's minimum load and see flicker or drop-out at the bottom of the range. A chandelier loaded with several bulbs, or an LED-rated dimmer, avoids that.

2700K, the warm white tone that matches standard incandescent and halogen lamps. If the rest of your fixtures are running 2700K, this blends with them. It will read noticeably yellower than a 3000K or 4000K lamp, so don't mix it into the same chandelier as a cooler bulb.

The S21262 puts out 200 lumens at 3 watts. That lands in the range of a 25 watt incandescent candelabra lamp, so it suits chandeliers, wall sconces and decorative fixtures where you want visible filament-style glow rather than task light. For brighter output in the same socket you need a higher-lumen candelabra lamp.

The S21262 is rated 90+ CRI, which means colors, skin tones, wood finishes and fabrics render close to how they look under incandescent light. For hotel lobbies, restaurants, guest rooms and retail displays, that is the difference between a space looking warm and looking washed out. Standard 80 CRI LED candles cost less but flatten reds in particular.

Clear glass. With the glass clear you see the LED elements inside, which is the look you want in an exposed-socket chandelier or a fixture with open shades. If you have bare bulbs at eye level and want to cut glare, a frosted or milky candelabra lamp is the better choice.

Four things decide whether a candelabra LED matches across a property: shape, base, color temperature and CRI. The S21262 is B11 shape, candelabra base, 2700K and 90+ CRI at 200 lumens. Order against that combination and every fixture reads the same. Swapping in an 80 CRI or 3000K lamp on one floor is what makes a building look mismatched, even when the wattage is identical.

Construction is glass with a nickel plated aluminum base. The aluminum helps pull heat off the LED, and the whole lamp weighs only 0.04 lb, so it puts almost no load on delicate chandelier arms or candle sleeves.

Satco publishes a spec sheet PDF for the S21262 covering the lamp's published performance data. The headline figures are 3W, 200 lumens, 2700K, 90+ CRI, 120V, clear B11 with a candelabra base.