You may also like
SATCO Lighting S21282 3W B11 LED, Clear, Medium Base, 90 CRI, 2700K, 120V
3 Watt B11 LED - Clear - Medium base - 90 CRI - 2700K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.025A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- B11
- Lumens:
- 250L
- Operating Frequency:
- 60Hz
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 25W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 3W
Satco Lighting S21282 – Frequently Asked Questions
1) Can I use this 3W LED filament bulb in an enclosed or outdoor fixture?
Yes on both. The S21282 is an enclosed-rated lamp, so sealed jar fixtures and closed-globe sconces are fine, and it carries a wet location rating for indoor or outdoor use. That covers covered entries, porch lanterns and exposed exterior fixtures.
2) Is this Satco B11 LED dimmable, and will it work on my existing dimmer?
The lamp is dimmable on 120V, 60Hz line voltage. It draws only 0.025A, so on an older magnetic or incandescent-rated dimmer you may need several lamps on the circuit to reach the dimmer's minimum load; LED-rated dimmers handle the low draw without flicker.
3) What incandescent wattage does a 3W B11 LED replace?
It replaces a 25W incandescent, putting out 250 lumens at 3 watts. For a multi-lamp chandelier or a hallway sconce run, that's the same light you had with roughly an eighth of the load on the circuit.
4) Will a clear filament LED look right in an open fixture where the bulb is visible?
That's what this one is built for. It uses an LED filament behind clear glass, so you see the lit filament rather than a frosted diffuser, and light throws 300 degrees around the lamp instead of forward only. Glass with a nickel plated aluminum base. In an exposed-bulb chandelier or a glass-front lantern it reads like the old clear candle lamp.
5) Is 90 CRI at 2700K warm enough to match the incandescent lamps still in my building?
2700K is the warm white color temperature incandescent lamps produce, and 90 CRI means color rendering close to that source, so skin tones and finishes look natural. It is a fixed 2700K lamp, not field-selectable, so every unit you buy matches the last one. Good choice when you're relamping a hotel or lobby in stages.
6) Does the Satco S21282 meet California Title 24 requirements?
Yes, it is Title 24 compliant, and it is FCC compliant as well. That matters for California residential and multi-family work where lamps in certain locations have to be on the compliant list.
7) Can this bulb be installed base-up in a ceiling fixture?
Burning position is universal, so base-up, base-down or horizontal all work. Useful for pendants and ceiling-mounted lanterns where the socket points down at the lamp.
8) How long does this LED candle lamp last compared to what I'm replacing?
Rated 15,000 hours average life. On a lobby or corridor fixture running about 12 hours a day that's roughly three and a half years between relamps, which is the argument for switching a fleet of decorative fixtures off incandescent.
9) Is this a three-way bulb?
No. The S21282 is a single-output 3W lamp, not three-way. In a three-way socket it will simply run at its one level, so if you need stepped output use a three-way lamp instead; if you need level control, this one dims on a standard dimmer.
How fast can I get the Satco Lighting S21282 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21282 come with a warranty?
Absolutely. The Satco Lighting S21282 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21282?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21282 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.