SATCO Lighting S21292 5.5W B11 LED, Frost, Medium Base, 90 CRI, 2700K, 120V

Both are fine. It's an enclosed rated lamp, so sealed glass globes, jelly jars and closed sconces are within spec, and it carries a wet location rating for indoor or outdoor use. Burning position is universal, so base up, base down or horizontal all work. Operating range is 120V, 60Hz.

Yes, the 5.5W B11 is a dimmable LED filament lamp. It is not a three-way bulb, so don't put it in a three-way socket expecting stepped levels. It draws 0.046A at 120V, which matters on a dimmer with a minimum load: a single bulb on a large dimmer can flicker, and on multi-lamp fixtures you'll want to confirm the dimmer is LED-rated.

It replaces a 60W incandescent candle bulb while drawing 5.5 watts, and puts out 500 lumens. Light color is 2700K, the warm white most people associate with incandescent. Frosted glass, so the filament is diffused rather than visible as a sharp line.

The S21292 is a 90 CRI lamp, which is the threshold most hospitality, retail and healthcare specs call for when color rendering is on the drawing. At 2700K with 90 CRI, skin tones, wood and fabric read close to incandescent. Standard 80 CRI LEDs will look flatter side by side, so if you're relamping a space in stages, don't mix the two in the same fixture run.

Yes, the S21292 is listed as Title 24 compliant, and it's FCC compliant. It is not DLC listed, so if your utility rebate program requires a DLC qualification, this lamp won't qualify under that path.

Beam spread is 300 degrees, so it distributes nearly all the way around the lamp rather than firing forward like a reflector. That's what you want in a chandelier, sconce or open pendant where the bulb is seen from all sides. For directional task or accent light, a reflector lamp is the better pick.

Glass envelope with a nickel plated aluminum base. It's an LED filament construction, so the glass is frosted to diffuse the filament strands rather than a plastic diffuser over a board.