SATCO Lighting S21320 5.5W CA10 LED, Frost, Medium Base, 90 CRI, 2700K, 120V

It replaces a 60 watt incandescent candle lamp while drawing 5.5 watts at 120 volts, producing 500 lumens. Current draw is 0.046 amps, so a long run of decorative sockets on one circuit stops being a load problem.

Yes. The S21320 is an enclosed rated lamp and carries a wet location rating, so it can go in sealed ceiling fixtures, closed-globe sconces, and exterior lanterns exposed to weather. It is also rated for universal burning position, so base-up, base-down, or horizontal are all fine.

At 2700K it is warm white, the same color point as a standard soft white incandescent, so it blends with existing incandescent or 2700K LED lamps. The 90 CRI rating is higher than most commodity LEDs, which run 80 CRI, so in a mixed fixture the S21320 will render skin tones and finishes noticeably truer than its neighbors. Color temperature is fixed, not field selectable, so you cannot dial it to match a 3000K room.

The S21320 is the frosted version. The frost coating diffuses the LED filament so you see an even glow rather than individual bright filament strands, which is what you want in an open chandelier or sconce where the lamp is in direct sight line at eye level. Clear is the choice when you want the filament itself to read as a decorative element. Light output and color are the same either way here: 500 lumens at 2700K.

Yes, the S21320 is listed as Title 24 compliant, which matters if you are specifying for residential or multi-family work in California where high-efficacy lamps are required. It is also FCC compliant. It is not DLC listed, so if your utility rebate program requires DLC, this lamp will not qualify.

Rated at 15,000 average hours. On a lobby or corridor fixture running roughly 12 hours a day that is about three and a half years between relamps, which is the number to use when you are budgeting labor on a large fixture count.

Beam spread is 300 degrees, essentially omnidirectional. That is the behavior you want in a chandelier, candelabra, or open sconce where light needs to go out sideways and up, not a narrow downward cone. For aimed task or accent light you want a reflector lamp instead.

Glass envelope with a nickel plated aluminum base. The plated base resists corrosion better than bare brass in damp exterior sockets, which pairs with the lamp's wet location rating. Each lamp weighs 0.044 lb.