SATCO Lighting S21301 4W CA10 LED, Frost, Candelabra Base, 90 CRI, 3000K, 120V
4 Watt CA10 LED - Frost - Candelabra base - 90 CRI - 3000K - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.033A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- CA10
- Lumens:
- 350L
- Operating Frequency:
- 60Hz
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Glass / Nickel Plated Aluminum
- Incandescent Equivalent:
- 40W
- Location Rating:
- Wet
- CRI:
- 90
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4W
- Product Weight:
- 0.035 lb
- Product Material:
- Glass / Nickel Plated Aluminum
- Department:
- Electrical
Satco Lighting S21301 – Frequently Asked Questions
1) Will the Satco S21301 candelabra LED work in an enclosed fixture?
Yes. The S21301 is an enclosed rated lamp, so it can go in a closed glass sconce, lantern, or jar fixture without voiding the lamp's rating. It also carries a Wet location rating and is listed for indoor or outdoor use, which covers covered porch lanterns and exterior wall sconces. Burning position is universal, so base-up, base-down, or horizontal all work.
2) Can I put the Satco S21301 on a dimmer?
Yes, the 4W CA10 filament lamp is dimmable on 120V, 60Hz line voltage. Note the current draw is only 0.033A per lamp, so on a chandelier with just a few lamps the total load may fall under the minimum load an older incandescent dimmer needs to run smoothly. On small fixtures, use an LED-rated dimmer.
3) Will the 3000K frost finish match the other candelabra bulbs in my building?
The S21301 runs 3000K, a warm white that is a shade cooler than the 2700K most decorative candelabra lamps ship at. It is a fixed color temperature, not CCT selectable, so what you order is what you get. The frost coating diffuses the LED filament, which gives a softer look than a clear lamp in an open-shade fixture. If the rest of your fixtures are 2700K clear, you will see the difference side by side.
4) Is this candelabra LED good enough for color-critical spaces like hospitality or retail?
At 90 CRI the S21301 renders color well enough for hotel lobbies, dining rooms, and retail display where skin tones and finishes matter. It is also Title 24 compliant, which is what California jobs ask for on residential and some commercial lighting. It is not DLC listed, so it will not qualify for utility rebate programs that require DLC.
5) Will this candelabra bulb work in a three-way socket or a candelabra night light with a dimmer switch built in?
No. The S21301 is not a three-way lamp, so in a three-way socket it will light at one level only. It will dim from an external dimmer on the circuit, but it does not step through three-way settings.
6) How does this spread light in an open chandelier or candelabra fixture?
The lamp has a 300 degree beam spread, essentially omnidirectional, so it lights a room from an open chandelier arm or an upward-facing sconge the way an incandescent candle lamp did. The LED filament construction is what gives that wide distribution rather than the forward-throw pattern you get from a chip-on-board candelabra lamp.
7) How long does the Satco S21301 last, and is it worth relamping a whole property with?
Rated at 15,000 average hours. For a chandelier burning 6 hours a day that is roughly 6.8 years before a relamp cycle, which is the case for group-relamping tall or hard-access fixtures rather than spot replacing. Each lamp pulls 4W against the 40W incandescent it replaces.
8) Is the Satco S21301 glass or plastic, and will it hold up in a fixture guests handle?
Glass with a nickel plated aluminum base, so it is a real glass decorative lamp rather than a plastic-diffuser type. The whole lamp weighs 0.035 lb, which matters on delicate chandelier arms and clip-on shade fixtures that were never meant to carry weight.
How fast can I get the Satco Lighting S21301 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21301 come with a warranty?
Absolutely. The Satco Lighting S21301 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21301?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21301 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.