You may also like
SATCO Lighting S21295 3W CA10 LED, Frost, Candelabra Base, 90 CRI, 2700K, 120V
Model: SATCO-S21295
SATCO Lighting S21295 3W CA10 LED, Frost, Candelabra Base, 90 CRI, 2700K, 120VSatco's 3-watt LED lamp is traditional, yet contemporary with its sleek finish and energy saving LED technology...
Satco Lighting
$4.95
SATCO Lighting S21311 3W CA10 LED, Frost, Medium Base, 90 CRI, 2700K, 120V
3 Watt CA10 LED - Frost - Medium base - 90 CRI - 2700K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Lumens:
- 250L
- CRI:
- 90+
- Product Material:
- Glass / Nickel Plated Aluminum
- Product Weight:
- 0.044 lb
- Dimmable:
- Yes-Dimmable
Satco Lighting S21311 – Frequently Asked Questions
1) Can I dim the Satco S21311 3W LED candle bulb?
It is a dimmable lamp. Keep in mind a 3 watt LED draws very little current, so on older dimmers sized for incandescent loads you may see flicker or a limited dimming range unless you use an LED-rated dimmer or add more lamps to the circuit.
2) How bright is a 3W CA10 LED, and what incandescent bulb does it replace?
The S21311 puts out 250 lumens, which is in the range of a 25 watt incandescent candle lamp. It is a decorative output level, meant for chandeliers, sconces, and accent fixtures rather than for lighting a room on its own.
3) Is the Satco S21311 warm enough to match the incandescent bulbs in the rest of my chandeliers?
It is 2700K, the same warm white tone as a standard incandescent, so it blends with existing incandescent or 2700K LED lamps in adjacent fixtures. With 90+ CRI it also renders wood tones, fabrics, and skin tones closer to incandescent than a typical 80 CRI lamp, which matters in hospitality and residential common areas.
4) Is the Satco S21311 clear or frosted, and will the filament show?
Frost finish. The glass diffuses the LED, so you get an even glow with no visible point sources, which is what you want in an open chandelier or sconce where the lamp is in direct view. If you want a visible filament look, this is not the version to order.
5) I need to standardize chandelier lamps across a building. What exact part number do I order for the Satco 3W frosted CA10?
Order Satco S21311. That number covers the 3W CA10 LED in frost with a medium base, 2700K, 90+ CRI, 250 lumens, 120V. One finish, one configuration, so there is nothing else to specify on the order.
6) What is the Satco S21311 made of, and is it suitable for an enclosed sconce?
Construction is glass with a nickel plated aluminum base. The aluminum base acts as the heat path, and at only 3 watts the thermal load is minimal compared with a higher-output LED, so it is a practical choice for small decorative fixtures.
How fast can I get the Satco Lighting S21311 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21311 come with a warranty?
Absolutely. The Satco Lighting S21311 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21311?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21311 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.